View Full Version : Kodak Panaram No1 for £2
12-15-2007, 06:48 AM
Ha ha! sorry, not selling...just bought one for £2 at a car boot sale yesterday. Didn't actually know what it was at the time but it looked a rather lovely object. After some scouring on the internet, we discovered how to open it and what it was. It is in pretty mint condition and seems to be working perfectly.
I loaded it last night with some 120 film to test the size, spacings of the exposures etc. There are two empty metal spools in it which fit perfectly but the 120 spools are longer and the holes in the ends of the spools are too big and make the film run a little sloppy and loose.
I remedied this by fitting some bushes inside the spool ends (made from some rubber tubing). The other problem is the spools are slightly too long to enable the hinged spool holders to close and lock properly. Rather than changing the interior fittings in the camera or laboriously sanding down the spool ends I am going to put a small silicone button (the self adhesive kind used to damp kitchen cupboard doors) so the spool holder will be pushed closed against the inside of the case.
The film now is evenly tensioned and runs smoothly. Today I'm going to try it out (very excited, I can tell you!). I'll post the results soon (if they're not light leaked to death!!)
I'd be very interested to see more examples of images from these cameras and hear anyones experiences or links.....
The only problem now is the negs won't fit in Bill's Devere 504!
Mandy (Bill's Girlfriend):D
12-15-2007, 07:15 AM
For all sorts of panaromic goodness. Thank god I can't afford all of these . . .
lucky girl. that's a great camera.
12-15-2007, 08:23 AM
Just £2!!! Mandy what a great find.
Check out Ivan Lutterer's photography, his book 'Panoramaticke Fotografie' is pure inspiration. He used a Kodak Panoram 6x18cm. Also the work of Josef Sudek he used a 10x30cm version.
I just picked one up as well. I'm eagerly awaiting its return from Ken Ruth for bellows repair and similar modifications as you describe. Mine came with an early Goerz Dagor for a taking lens. Can't wait to see your images.
12-15-2007, 11:55 AM
I used a small piece of aluminum tubing as a bushing in the 120 spools. I sold mine, and often wish I had kept it. They are terrific little cameras.
12-15-2007, 08:06 PM
I bought one for a trip down Route 66 this past summer, and it did great. I've posted just a small number of photos from it at photo.net, but they've been scattered into different posts because they were usually a result of a question like this one.
I've had the best luck with a 620 spool for the fresh film, and a 120 for the takeup spool, but it could be that the design had changes over the years it was in production. IOW, YMMV. But 620 and 120 spools were what I had handy.
2 lbs. is an amazing price. I won't tell you what I paid for mine, your head would swell.
12-15-2007, 08:35 PM
Couple Rout 66 pics, mine, from my 100 y/o Kodak Panoram:
IIRC, Geronimo's Trading Post in AZ, near Petrified Forest:
Western terminus of Route 66:
Following are from the same trip, also Panoram pics:
Here's the Superstition Mtns, east of Phoenix AZ:
And campsite at the top of "Hole in the Rock", the fabled Mormon wagon trail from Escalante UT to Bluff UT, via the Canyonlands:
12-15-2007, 10:08 PM
Ha ha! sorry, not selling...just bought one for £2 at a car boot sale yesterday.
You lucky Cornish person you! Boot sales round here seem to be bargain free zones, at least as far as interesting cameras and lenses are concerned. :(
12-15-2007, 11:37 PM
Oh, also... a tip on light leaks.
Mine, I load it in dim light, and seal it with gaffer's tape. Between shots, I keep it in a camera bag that's dark / nearly light tight, only taking it out to shoot.
I also unload in dim light, if I can.
I get light leaks on the film with the above techniques, but only along the very extreme edges, and not in the image, so I've not taken any further steps to try to seal it up better.
12-19-2007, 05:12 PM
thank you for the replies and links, lovely crisp pictures Doug.
We took it out to play at the weekend but the light conditions were really too low. To compensate I took double and some triple exposures on the low speed (1/50th) setting with Delta 400 & HP5, problem with this was there was some camera shake evident so multiple exposures are not ideal. We shot the first 3 exposures on the first film with the camera taped up with electrical tape to prevent light leaks, then peeled it all off for the final exposure, just to find out if there was any light getting in anywhere. We were very pleasantly surprised to find there were none at all and shot another couple of films without any tape.
Using Ilford films we worked the spacings out to be the first star/flower markings on the backing paper after Nos 2,6,10 & 14 showing through the film counter window. Giving 4 exposures per film.
Hope to get some pics up here in the next couple of days.
We're looking forward to taking it out in decent light...if we ever get any this winter!
12-20-2007, 09:06 AM
Thanks for the compliment on my Panoram pics.
D'oh! I forgot to mention the 2-6-10-14 spacing. Sort of an important thing....
I've never tried multiple exposures, figuring my (sorta light) tripod would move. I've also read a claim on the Net that a guy manually moved the lens back and forth (spring pressure is really light once the lens leaves its nest), but that would seem to have issues as well, and I cannot confirm or deny.
In low light (unless it's *really, really* low), you could take 400 speed film and the low-speed lens setting (high is about 1/100 and low about 1/50, near as I can guesstimate) and then push-process it. Since there's only 4 frames, it's not like it's going to just sit in there.
And if the light was really low, that may be why you had no light leaks. I hope you don't have light leaks, but be aware you may still have them on a bright day.
I also tape over the ruby window with gaffers tape, and then just peel it back when advancing film.