View Full Version : Vacuum or CPF for 14x17, 16x20?
Richard K.
01-26-2008, 09:03 AM
Is a CPF good enough or does one need a vacuum frame for 14x17, 16x20?
Please share experience...thanks!
-Richard
Michael A. Smith
01-26-2008, 06:41 PM
A CPF will do the job, but a vacuum frame is so much quicker to use.
Michael A. Smith
jgjbowen
01-26-2008, 07:13 PM
A CPF will do the job, but a vacuum frame is so much quicker to use.
Michael A. Smith
ditto
FredW
01-28-2008, 08:14 PM
My contact printing, is just two pieces of 10mm glass, with some masking tape to make a hinge. The weight of the glass is enough to hold everything down. Just make sure to have one sheet cut longer, 2-3cm. This will give you a place to separate the sandwich.
Jim Fitzgerald
01-28-2008, 08:41 PM
I like the contact I get using my vacuum frame for my 8x20 prints. Just my .02.
Jim