PDA

View Full Version : How to store coated dry plates the best way ?



Falkenberg
05-12-2008, 01:25 PM
I am thinking about coating a batch of plates, but was wondering about what is the best way to store them until I use them. I know they have to be stored in a light tight box, but what is the best way to pack the plates ? How do I avoid to damage the emulsion ?

dwross
05-12-2008, 02:45 PM
I've been stacking mine with sheets of YUPO polypropylene watercolor paper between each plate. I use half of a 9x12 sheet for 5x7in plates. YUPO is a little on the expensive side, but it's tough, reusable, and smooth enough I know it won't abrade the emulsion. Make sure, of course, that the plates are good and dry before stacking. Keep the box small enough that the plates can't knock around too much.

Best of luck,
d

Falkenberg
05-12-2008, 02:48 PM
Any recommandations on a good box ? Does it have to have some kind of ventilation ? Could a flightcase be used ?

dwross
05-12-2008, 03:33 PM
I use a black plastic 8x10 clamshell paper safe. I've had it for years, so I don't know if they're still made. It's not ventilated, but I've been using my plates within a couple weeks of coating them. I don't know anything about long term storage. I'd be willing to guess that heat and humidity wouldn't be a great idea. And like film, if you decide to refrigerate the plates (and I never have) you'd want to store them airtight and bring them back up to room temperature before you broke the packaging to avoid condensation.

re: flightcase: I don't know. If it's solid and lightproof and doesn't seem to off-gas anything that could potentially fog emulsion (and I don't know what that would be) I'd give it a try.