PDA

View Full Version : ADOX 220?



David A. Goldfarb
02-08-2010, 12:24 PM
Mirko, what do you think? Now that there is soon to be no supplier of B&W 220 film of any type in the world, do you think that Adox could step in and fill that gap using the hand assembly techniques that are currently used at the Efke plant for 127 and 620?

Chazzy
02-08-2010, 01:14 PM
Mirko, what do you think? Now that there is soon to be no supplier of B&W 220 film of any type in the world, do you think that Adox could step in and fill that gap using the hand assembly techniques that are currently used at the Efke plant for 127 and 620?

I fervently hope that that is possible, although I have a stock of Ilford 220 in the fridge and 40 rolls of TXP are on the way to go in my freezer. I'm not sure how long it will take me to go through such a stockpile. There are certainly a lot of 220 backs in use in the U.S.. The format apparently was never as popular in Europe, for reasons I don't understand.

TSSPro
05-06-2010, 10:44 AM
I have 220 backs that love to use, I just haven't any 220 reels. If it becomes available, and sure as heck rootin for ya- it might get sent to DR5 or elsewhere.

Michel Hardy-Vallée
05-06-2010, 11:47 AM
I have 220 backs that love to use, I just haven't any 220 reels. If it becomes available, and sure as heck rootin for ya- it might get sent to DR5 or elsewhere.

Standard Paterson reels allow you to process 220.

David A. Goldfarb
05-06-2010, 11:59 AM
Hewes makes 220 reels and they fit a standard stainless steel tank.

TSSPro
05-07-2010, 11:06 PM
Sweet, thanks for the info. I've always gotten the hand-me-down stuff from photographers that I work for and all they had were 120. B/c of that I have always stuck with machine process films for 220.

Thanks again.

funkpilz
05-14-2010, 03:49 PM
I would love to see Adox AP 100 in 220, count me in for a big order. Well, as big an order as my budget will permit of course. But I promise to support Adox by promoting you wherever I can!

Chazzy
05-14-2010, 04:20 PM
I thought that Mirko would comment by now. Has anyone messaged him about the thread?

K-G
05-14-2010, 04:43 PM
I put the question on the German ADOX-PHOTOIMPEX Photolaborforum where the new and coming ADOX 400 replacement for Agfa APX 400 is discussed. Mirko answered that he didn't rule out the possibility for a 220-version but for the introduction they have to concentrate on 135 , 120 and sheet film sizes. If we continue to beg, pray, hope and threaten there may be result one day.
I am enclosing a link to his answer so start looking for your old German dictionary and gramar. Good luck !

http://www.fotolaborforum.eu/index.php?showtopic=2259&st=20

Karl-Gustaf

AgX
05-14-2010, 05:06 PM
For the foreseeable future he rules out any type 220 conversion, seen the complexity of even doing a type 120 conversion in decent quality.

David A. Goldfarb
05-14-2010, 05:23 PM
Thanks for inquiring, K-G.