View Full Version : Problem with film in Hassy
04-23-2010, 02:40 PM
I just got a 501c/m and the camera and back are in great shape. However I've ran three rolls of 120 through the A12 back and each one of them has had dents and bumps in the film. First two rolls I chalked up to being new to putting the rolls on plastic reels. Third roll I had my Darkroom instructor load the film onto a steel roll for me and I ended up with the same results. The bumps and dents are all over the film so not sure I can narrow whats causing it. Any ideas? It doesn't show in my prints unless its supposed to be really flat then you get the light from the indention bent. Thanks -Twellsphoto
04-23-2010, 02:50 PM
Push a roll through the camera and do not develop it. Unroll it in daylight and see if it has dents and bumps. Then you will know if it is the back that is it causing it.
04-23-2010, 03:13 PM
Did you have the film under the flange in the back that helps to hold the film flat?
04-24-2010, 10:59 AM
You might want to switch this to the proper forum so that you will get more responses from folks that shoot medium format.
04-24-2010, 12:26 PM
Yeah, sorry I cruise both sections commonly and guess I wasn't paying much attention when I posted this, hopefully an admin will movie it for me.