PDA

View Full Version : Recomar ground glass thickness?



BobD
09-13-2010, 09:22 PM
I'm restoring a Recomar 33 and now just need to replace the missing ground glass (I have the GG unit but not the glass itself) which I plan to make myself.

Could someone tell me the thickness of the original glass? Also, was it simply rectangular or were the corners cut off, etc?

Thanks

Steve Smith
09-14-2010, 03:08 AM
I have had a couple of these (not Kodak but similar if not the same construction). The glass is about 2.5mm thick. I can't recall how the glass fits but the thickness shouldn't be too criticall as long as the ground side fits up against a recess which places it in the correct position. Any extra thickness of glass on the non ground side will not be an issue.


Steve.

Ian Grant
09-14-2010, 10:52 AM
2mm glass fits all my German 9x12 cameras. Sometimes the original glass is slightly thinner, however there's usually springs to push the ground side against the frame which will allow a variation anyway.

Ian

BobD
09-14-2010, 09:31 PM
Thanks! :)