PDA

View Full Version : Prescysol or Prescysol EF in Canada



rdstoker
02-16-2011, 09:26 AM
Does anyone know of where I can lay my hands on some Prescysol (original or EF) other than order it from the Photographers Formulary? From PF the shipping is more than the product!

Cheers

Ian Grant
02-16-2011, 09:34 AM
Your do better to use Pyrocat HD (or MC) as Prescysol keeps very poorly and Pyrocat gives better results. Welcome to APUG BTA

Ian

Steve Smith
02-16-2011, 09:41 AM
My Prescysol has kept very well. I don't know if the results are inferior to Pyrocat but I am impressed with it.


Steve.

Ian Grant
02-16-2011, 10:13 AM
My Prescysol has kept very well. I don't know if the results are inferior to Pyrocat but I am impressed with it.

Steve.

Comparing Prescysol I seen that that an opened part used bottles lose performance and oxidises in a bout 3 months, in comparison Pyrocat lasts well over a year (non Glycol .version).

Ian

Steve Smith
02-16-2011, 01:35 PM
Well, my part B has gone black but it still seems to work o.k. and it has been between 2/3 and 1/3 full in the past year.

I do have some PMK Pyro to try though.


Steve.

rdstoker
02-16-2011, 02:09 PM
Cheers, I was primarily interested in Prescysol because of the standardized dev times for multiple films and it's vote of confidence from Les MacLean on another site, but as I see that B&H (our online photography super store over here) carries Pyrocat-HD and their shipping to the great white north is reasonable, I might try that route. Any recommended 120 films, I am looking for smooth tones and good exposure latitude in the iso 100-200 range, I was leaning toward FP4+ with the Prescysol, is it also good in Pyrocat or are there better?

Steve Smith
02-16-2011, 02:17 PM
You can't go far wrong with FP4+


Steve.

Ian Grant
02-16-2011, 03:15 PM
Cheers, I was primarily interested in Prescysol because of the standardized dev times for multiple films and it's vote of confidence from Les MacLean on another site, but as I see that B&H (our online photography super store over here) carries Pyrocat-HD and their shipping to the great white north is reasonable, I might try that route. Any recommended 120 films, I am looking for smooth tones and good exposure latitude in the iso 100-200 range, I was leaning toward FP4+ with the Prescysol, is it also good in Pyrocat or are there better?

When Les McLean asked Hogan if Prescysol was the same as Pyrocat HD I'm told he shrugged his shoulders and wouldn't reply :D

Also Hogans instructions for Prescysol were originally an exact copy of instructions for Pyrocat HD.

Yes you can standardise on one Dev time for normal development wit Pyrocat HD for Kodak, Ilford, Fuji and EFKE/Adox films, probably Chinese films like Era as well. That's what I've been doing for about 6 years now. However Foma films need about 70-75% less development or they are far to contrasty.

Ian

Jon Butler
02-16-2011, 04:03 PM
I also use Pyrocat HD for all films, it's gives me excellent negatives and it costs next to nothing to mix yourself. That said you must be very precise with measurements but easy enough with good scales.
JON.

Steve Smith
02-16-2011, 06:05 PM
The time for Prescysol isn't very critical. I have developed for twice the 10.5 minutes with no apparent increase in density (someone called me on the phone and kept me talking half way through development!).

I believe that changing the ratios of A to B and the overall strength are the only ways to change its characteristics but I have not had the need to do this as it does everything I want at its suggested time.


Steve.

Adrian Twiss
02-17-2011, 02:35 AM
When Les McLean asked Hogan if Prescysol was the same as Pyrocat HD I'm told he shrugged his shoulders and wouldn't reply :D

Also Hogans instructions for Prescysol were originally an exact copy of instructions for Pyrocat HD.

Yes you can standardise on one Dev time for normal development wit Pyrocat HD for Kodak, Ilford, Fuji and EFKE/Adox films, probably Chinese films like Era as well. That's what I've been doing for about 6 years now. However Foma films need about 70-75% less development or they are far to contrasty.

Ian

Ian

My own experiences with Pyrocat HD (sodium carbonate version used 1+5+94) suggest that developing times for varied films vary quite a lot. When I started using Pyrocat I used Sandy Kings graphs which he included in his article posted on www.unblinkingeye.com. I found my negatives to be quite under developed. I think I have finally got my times locked down to the following: -

HP5+ 320iso 17minutes
FP4+ 100iso 14 minutes
Adox CHS100 80iso 8 minutes (2+10+88)
Efke R25 18iso 10 minutes (2+10+88)
Kodak Verichrome Pan 100iso 9 minutes

I have some Fomapan 100 and ERA 125 in the freezer but have not tried it yet. Many of my subjects have an SBR of only 4 stops. I would be grateful to know what your standardised time it.

I have stopped using Prescysol EF simply on the grounds of economy. I used to use it at double strength for 10.5 minutes to get the necessary punch in my negatives. I found it lasted about 6 months once opened.

Adrian

Ian Grant
02-17-2011, 02:56 PM
Adrian, I use the Potassium Carbonate version of HD and standardise at 1+1+100 for 120 & 5x4, with an occasional roll of 35mm.

My times for HP5 (EI320), Delta 100 (EI64) & 400 (EI320), Acros (EI100) and EFKE PL25 (EI50) are 15mins @ 20C with inversion agitation. However in the Summer I process at 26-27C it can be 40C+ outside at times so I process to match the tap water temperatures and reduce the dev time to compensate. Fomapan 100 & 200 I process for 11 minutes and shoot at half the box speed, that tames their inherent contrast perfectly.

For my 10x8 tray processing I use 2+2+100 with EFKE PL25 at 50EI processed for the equivalent of 9 minutes at 20C.

I'm shooting mostly in the almost constant bright sunlight here in Turkey and the murky dingy weather when in the UK and have found little need to make exposure/development adjustments to compensate. While I use the Zone system I don't do N+ or - 1 adjustments and only N+ or - 2 when really needed/wanted. I don't necessarily want my images shot in foogy (UK) conditions to have a full contrast range.

I think the film that astounds me in Pyrocat HD is LF HP5, it's my film of choice now here in Turkey where I often have to shoot 5x4 hand-held, gives me 1/125th @ f22, your time's etc are not far different :D

Your EFKE/Adox speeds seem low though, their Box speeds are actually for Tungsten light where their reduced red sensitivity causes greater speed loss compared to most films. Jessops sold EFKE as own brand for years at double the ISO/

I've found that the issues of developer like Pyrocat and Prescysol deteriorating are usually linked to the type of plastic bottle used, and the Prescysol bottles aren't ideal. Oxidised Pyro devs like Prescysol or Pyrocat can cause uneven staining so even though a negative can look OK visually you can get unexpected patchiness when printing (or scanning), so once a developer turns colour it should be discarded. PMK is worse which is why it isn't used for Rotary processing where aerial oxidation exacerbates the problem

A tip making up Pyrocat is make sure your Metabisulphite is reasonably fresh the dev keeps 18 moths (even here in Turkey) in a part filled bottle (in use) if it is fresh, and Pyrocat only start to oxidise once the dissolved SO2 from the Metabisulphite is depleted.

Ian

Tom Kershaw
02-17-2011, 03:48 PM
Ian,

I switched back to XTOL / D-76 last summer as I found Pyrocat-HD unreliable with rotary processing; although more recently I've been processing 120 B&W film in stainless steel tanks so some of the problems may relate to rotary processing work flow issues.

Tom

Adrian Twiss
02-18-2011, 03:50 AM
Ian

Thank you for taking the trouble to respond. This is really useful information. I had no idea that the speeds for Adox CHS are for tungsten lighting. It would explain Jessops R200 which a knew was Efke but I also knew that Efke did not have a 200 iso film in their inventory.

Adrian

Adrian Twiss
03-04-2011, 03:05 AM
I have now processed six sheets of Fomapan 100 in Pyrocat HD at the times and speed used by Ian given in a previous post. I have to say they are bang on giving negatives that are easy to print on grade 2 - 2.5 in a diffuser enlarger.

Sadly 5 out of six of the shots have negative defects. I have heard about variable quality with Fomapan 400 but I did not know that the 100 was susceptible as well. I would be grateful if anyone using this combo had had to take any special precautions other than careful consistent technique. Ilford negatives processed on the same day did not exhibit any defects. I should point out that I use distilled water when formulating the stock solution but make up the working solution using tap water.

CGW
03-04-2011, 03:54 PM
Does anyone know of where I can lay my hands on some Prescysol (original or EF) other than order it from the Photographers Formulary? From PF the shipping is more than the product!

Cheers

Ever try Nymoc in Toronto? Check the archives for location detals.

Leigh Youdale
03-04-2011, 04:18 PM
[QUOTE=Adrian Twiss;1147902
Sadly 5 out of six of the shots have negative defects. I have heard about variable quality with Fomapan 400 but I did not know that the 100 was susceptible as well. I would be grateful if anyone using this combo had had to take any special precautions other than careful consistent technique. Ilford negatives processed on the same day did not exhibit any defects. .[/QUOTE]

Sadly too, I gave away 25 rolls of unused Fomapan of various types and sizes to the local school and went back to using Ilford, Fuji or Kodak. There were too many shots ruined by emulsion faults with the Foma that I tried.