Categories
|
Articles
by Published on 11-13-2006 06:54 PM
Mix the chemicals in order, all should dissolve between 120 and 150 degrees.
You should try 1:6:200 at 70 degrees for printing on VC paper with...
by Published on 11-07-2006 12:37 AM
BATH A
Metol- 6.25gr
Soduim Sulfite- 85 gr
Water to make 1 liter
BATH B
Sodium Metaborate- 12gr
Water to make 1 liter
ca. 3 min each bath.....
by Published on 11-07-2006 12:22 AM
BATH A
Metol- 5gr
Sodium Sulphite- 100gr
Water to make 1 liter
BATH B
Borax- 10gr
Water to make 1 liter
3-5 minutes in each bath. Do not...
by Published on 10-31-2006 08:03 PM
Here's one version of my akaline buffered "rapidized" fix - quantities are not critical. I use cups, spoons and dashes...
The metaborate ...
by Published on 10-31-2006 08:01 PM
Here is the exact formula and other details of the super fix that I
outlined in the thread on stop vs wash.
Formula:
Ammonium Hypo solution...
by Published on 10-31-2006 07:52 PM
ammonium thiosulfate 120g
(or 60% solution 200 ml)
sodium sulfite 15g
sodium metabisulfite 5g
water to make 1.0 liter
target pH 7.0 plus/minus...
by Published on 10-31-2006 07:43 PM
This is a non-hardening fixer. I picked up the formula from a friend but see that it has also been published by Gordon Hutchings in the "Book of....
by Published on 10-31-2006 07:41 PM
Water 700 ml
Ammonium thiosulfate soln. (58%) 185 ml
Sodium sulfite, anh. 10 g
Sodium hydrogen sulfite 8.4 g
Water to make 1 l
PH = 6.5 at...
by Published on 10-31-2006 07:37 PM
My own stopbath...hmm...a lot may use it, but I found out myself...
It's odourless...
To make 1 litre
* 5-10 grams of citric acid...
by Published on 10-31-2006 07:35 PM
I make my stop out of 26 grams of Sodium Bisulfate in 2 gals. of water. That comes out to about 3/4 full of a 35mm canister. Works very well for...
|
Top Authors
|
