All,
I was just about ready to drop into the developing mood when I discovered that no one lists a dev. time for fomapan 100 in pyrocat-hd. I searched the site, and came across the same question - without an answer.
Anyone ?
Edit: Tray Development.
Printable View
All,
I was just about ready to drop into the developing mood when I discovered that no one lists a dev. time for fomapan 100 in pyrocat-hd. I searched the site, and came across the same question - without an answer.
Anyone ?
Edit: Tray Development.
Times it is NOT :mad: :
8min
9:30min
I read a post by Mr. King stating that the times for pyrocat 1:1:100 are about 20% less than that of PMK. I found a time of 10min for PMK, hence my starting point.
I agitated once every 30s. If I had more negs, I would start off at 12mins and see where that takes me.
If you're doing tray development, get a dark green safe light, and develop by inspection. It's really easy. Just develop for 20% less than you think it'll take, turn the light on for a few seconds, look at the neg, throw it back in the developer if it needs more, repeat every minute or two until development is finished. Voila. You have a ballpark figure for how long it takes.
It has been tremendously helpful to me, I've never had to ask for developing times since I did. I do this with sheets, and then develop rolls roughly according to that.
- Thom
I forgot to mention to do a couple of brackets, over and underexposure, and see what turns out the best.
Michael and Paula I believe have really good instructions on how to do this on their website, under 'Writings' if I recall correctly.
What is Fomapan? Is it similar to Forte200, JandC200 and Bergger BPF, or is it different film? I have personally never tested or used it.
Sandy
Quote:
Originally Posted by SteveH
I have some Fomapan Classic 100, but I haven't tested it yet. From the product description, it may be similar to Efke PL 100.Quote:
Originally Posted by sanking
The Foma website: www.foma.cz
Fomapan Classic 100
A traditional single-layer, silver-rich film. Easily pushes to 200 and 400. Well known as the film that's almost impossible to get an unprintable image from.
Fomapan Creative 200
a T grain film, it is regarded as one of the best medium speed B&W films available with a long scale and tonal range.
Foma Action 400
A traditional single-layer, silver-rich film. Foma 400 is an excellent high-speed film yielding excellent tonal range in a classic emulsion.
Sandy,
Hrmm, I thought you were sent some in December of '04 ?
http://www.apug.org/forums/forum37/11036-fomapan-100-pyrocat-hd.html
No, I recall that John mentioned he would send me some for testing, but he either forgot or the package was lost because I never received the film.
Sandy
Quote:
Originally Posted by SteveH
Ah. Well Im going to be giving it another shot this evening. I took double exposures of my 3 shots today, so we'll see what happens. Im going to try 12mins and see where that takes me. Dependant upon my results, I will try the 1:2:100 to try to knock some time off of the successful development time.
Thanks for the suggestion. Unfortunately I don't have a dark green - neither does my local shop. I'll have to snag one online.Quote:
Originally Posted by huggyviking