How Do i Take the Door off A Nikon MB-1
I have two nikon MB-1 Batery holders One is Engraved :( :-One is missing a door.....It would be nice to make a good one out of the two
so I have a nice spare for my F2.
The door is held on by a pin, is this just one pin or two :- one top one bottom ?
If it is just one pin it should be possible to knock it out with a fine punch, if it is 2 then I will need to cut the donor MB-1 corner off to remove the door with the pins
and pull them out.
Has anyone been there ?