Cambo SC and similar cameras utilize 6x6 bellows, you might find a camera or bellows uber-cheap on auction sites.
Are the bellows you mention square? I need bellows that are around 2.5x2.5 - 3x3 inches with reasonable extension (haven't figured out exactly how long yet).Quote:
I have one here. It wouldn't be worth posting the whole body to you but if I can work out how to remove them, I could send the inner bellows to you.
Since I'm pretty specific about the size and dimensions I need, I'll probably just end up making a set. I'll go either the Gaffers tape route or maybe put a little more effort into it and do as Ian has sugested.
Haha no worries. I like making stuff anyway so I'm kind of looking forward to making them.Quote:
If I had time I'd make some for you Too many issues/problems and zero time
Definitely let me know when you get it all taken apart. Thanks!Quote:
As I have plans to use the outer, rectangular bellows myself, I might have a go at taking the body apart tomorrow. I will let you know what I find. I suspect that the internal dimensions are at least 2.25" square.
These bellows have an internal dimension of 40mm or about 1.6" so I think the DIY approach is your best option now. Sorry.
This probably also means that the outer bellows is too small for what I had planned!
Darn, no worries. Thanks for checking! I appreciate it!
Have you considered scavenging the bellows from a Polaroid?
I'm going to see what polaroids i have stored away tonight to see if any have square bellows. Beign square is important for the purposes of this project. It'll be a nice surprise if I have acceptable bellows in a box somewhere :)