What's causing this?
'Glad to have this forum to post a question.
The attached scan was developed about a week ago. I scanned it then and it was fine...I went back to it this morning and this is what I got.
It's Portra done with the Tetenol Press Kit.
Thanks in advance for any help!
Welcome to APUG.
If the negative itself changed then it may be incomplete fixing. That's A swag anyway.
If the negative looks fine then it's probably a scanner issue and DPUG is one place you might ask that question.
It's the scanner. BTDT. You're probably fouling a sensor somehow. AFAIK film wouldn't show straight lines if it were a chemical problem unless you dragged it through a pair of contaminated squeegee tongs or other nasty contraption. Scanning is OT here, the good folk at http://www.dpug.org/forums/home.php will be more knowledgeable about these things. :-)
Portra is a negative film. Somehow you are getting a positive.
Ain't computers wonderful? :-)
Originally Posted by ic-racer
Indeed it was the scanner....all set now. Thanks!
Scanners are inherently evil as you've discovered ;-)