Nice and inexpensive (and widely available) squeegee for print drying
Elsewhere, there is a thread about using window screen for print drying. On similar note, here is a squeegee I use to remove excess water from my prints.
The blade on this squeegee is very soft and pliable that it makes good even contact with the print with no risk of damaging the print. I've been using this for over a year with all sizes of prints, FB and RC with very good results.
It's pretty cheap at $7.00, and if you are a Prime member with Amazon, you can get it with shipping free.
I thought I'd share this with the APUG community.