Take the B22 off the baseboard and put it under your bed.
I don't have the D2. I have a D4, which is about the same size but a little more heavy. There's a B600 sitting in the darkroom right next to it that doesn't see much use at all. I wouldn't trade that D series enlarger for anything.
I have a much loved D-II, which used to live in a little darkroom in Carnegie Hall many years ago, where it was used for the printing of Irving Penn's work, along with several others. My father knew the two guys who ran the lab, and managed to get the enlarger from them when they closed up shop. It still works flawlessly, alongside our old Durst 606, which will be joined by a Durst Laborator 1000 with Pavelle 401 in the next few weeks.
I really do love my Omega, and can't stand the Beseler 23Cs that I work on here at school. Some of them are hideously out of alignment, and only one of them has a Schneider mounted in it. Student abuse has clearly taken its toll, but I really hate the Beseler negative carrier design, much prefer the two interlocking plates with pin cutouts and register grooves of the Omega D carriers.
The reason I prefer Beselers is that you can tilt the lens board. You might be able to do it on some Omegas, but none of the ones I have used. This is of a lot of use to me.
I'm in remission on this one, sent D2V and 23C II to their final resting place (recycled metal yard). Beseler 45 is the only one in the darkroom now. D2 is a very good enlarger.
Shame that I could not get anyone to take it locally, paper, craigslist no help. Didn't relieve one local inquiry.
Nope. Keep in mind... IF you had 6x6 negatives, which uses the exact same film, you'd be using 6x6 carrier. Provided your film doesn't dry awfully curly, you'll be fine. I never had any issues even when I crop it in such a way the actual enlargement factor is much larger than if I was printing 11x14.
They are fine if you get all the proper cones and the three sets of condensers or the variable condenser lamp house.
Don`t get a push pull elevation one, get a crank up/down.
Otherwise keep what you have.