Glad you got it sorted! :)
Congratulation Halford, very resourceful.
RE photo's: I see u for micro farads, 1000 x more capacitance than n nano... A bit higher voltage rating is no issue. Under capacitance will allow much higher ripple or if used as a time delay phase shifter) things will happen early. I assume nano was a typo? Best George.
Good morning, George;
Hal is OK. 0.22 ufd (micro-Farad) is the same thing as 220 nfd (nano-Farad). If it were the older 220 uufd or micro-micro-Farad (what is now called a pico-Farad), then we would have a real problem with the decimal point and it would be off by three (3) orders of magnitude. Hal is OK in this case.