Anybody using one of these for 4X5 film processing?

Quote:

---

Originally Posted by dking888

I also use one of these, and I find it to be much easier to load than the HP Combiplan holder. I have discovered that very gentle agitation is an absolute necessity for using this holder in the Patterson tank. I agitated a little bit to vigorously and had a sheet of film get ruined as it had several areas where the emulsion was scraped off. I have done very gentle agitation since then, and I have not had any problems since then.

Thank You Morgan for making these processors. I have put mine to good use by processing 12 sheets of 4x5 sheet film every week for a photography class that I am taking this quarter.

Daniel King

---

Hey Daniel,

Glad your getting the hang of the processor, yeah you have to use gentle agitations.

All the best,

Morgan.

Quote:

---

Originally Posted by jeroldharter

I haven't read this entire thread which is now quite long. But I wonder about an 8x10 version that could fit in a Jobo 2000 series drum or something commonly available.

It would us a lot of chemistry, but with 3005 drums fetching >$500 an alternative might be compelling.

---

Hey Jerold,

Doesn't really work in a rotary processor, but perhaps in the future.

All the best,

Morgan.

Quote:

---

Originally Posted by mark

Any chance of a 5x7 version?

---

slowly working on it, but not an insert will be its own system,

morgan.

more on ebay

http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT

cheers,

morgan.

Hi all,

MOD54 is now online,

http://mod54.com

The home of my processor.

Cheers,

Morgan.

Really nice lookin' website Morgan

sorry to bump this old thread. i would be testing my mod54 soon. i would like to ask if there are some people who had other techniques that would like to share using this processor. :) i've seen morgan video already. looking for other alternatives. actually i would be using this processor to an old paterson system 4 tank (not the super which is required). i just added some mods so i could use it properly with my old 3 reel paterson tank. what i added is a tube i cut from film canister to the top of the processor so it would not move or wiggle inside when invertion method is used. i made two tubes actually. the other one would be possible to use the twizzle stick rather than doing invertion.. i will try the twizzle stick first since my tank leaks a lot of water when i tested it in invertion method. i will try both and see which would work best for me. i will try to post result as soon as possible.

https://sphotos-b.xx.fbcdn.net/hphot...20985963_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...76036067_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...39194847_n.jpg