Hey Frank & DavidQuote:
Originally Posted by FrankB
David's is a good method if you can rotate the column, and have the space to the side.
Another idea I've seen is where your bench is divided into two with a board that can float up and down between them. (the enlarger is fixed on bench behind the moveable board or on the wall). Useful for when you want to do really big prints just occasionally. Also it's good if there is limited space, and saves moving the enlarger for the extra biggies.
Quite easy to set up (even for the dunce DIY'er like us).
I've applied my best drawing skills to the diagram attached (btw it's a cross-section ... if you weren't sure). :)