This tried to do everything to NOT get printed!
I started out with Porta 160, for an hour-long exposure. Fine and dandy. Then I got home, and accidentally developed it with BW chemistry and temperature with ISO 400 film (was shooting with 3 different films during the trip, but stored exposed sheets in one box, and got mixed up in the dark — notches felt similar). Upon realizing my bumbling mistake, and letting out some expletives, I proceeded to hang the film to dry. The sheet slipped off the clothes pin and landed emulsion-side down on the gritty concrete — more expletives were unleashed. Needless to say, the film had way too much density — I couldn't even scan it! I went ahead and tried to print through it anyway. After 192 sec. at f/5.6, it finally made it to a 9"x6" print, and here it is:
Has anyone else made a similar fumble before?