2000P print setup for large ohp film

[John Sarsgard]

I've gotten confident enough with Mark Nelson's PDN process that I'm starting to do some fairly large negatives, using the 13x19 inch OHP film. On my old 2000P, portrait format images work just fine. With landscape images, if I use print setup to rotate the image 90 degrees, the printer just prints it landscape (horizontally) anyway and truncates the image. So...decided I would just rotate it in photoshop and leave the setup in portrait mode...the one on the left. Same result! What am I doing wrong? Too much caffeine? Not enough incantations? Thanks in advance.

[Jeremy]

Are you rotating the photo in photoshop AND setting the printer to print in portrait mode? This is what you need to do.

[John Sarsgard]

I discovered that when using the 13x19 ohp film with my 2000P it doesn't work to do page setup separately from print with preview. I found that if I do setup from print with preview and then proceed from that point, everything works fine. BTW, the paper size in photoshop is "Super B". With 8 1/2 by 11 media, it doesn't matter where you do the page setup. Some kinda quirk, I guess.