I've decided that this enlarger will be too big for me to use in the forseeable future, and also need to clear some space.

The enlarger's a Beseler 23CII (I think, based on http://www.oresteen.com/bess23c.htm) in grey. It's marked as a 'universal colorhead', but that's just space for colour filters.

Mechanically it's very sound, but it will need re-wiring, for which all the parts are there. It's currently wired for 230 volts, but I couldn't get a ligh mount that would put the bulb in the right place for the condenser, so you will need to re-fit the old light mounting, and probably wire up with a 230-110 V transformer.

Alternatively I believe that more modern heads also fit. You will also need to get a negative holder, or make one - I used this with a neg holder made from thick card.

Photos here:
DSCN1107.JPG

DSCN1108.JPG

DSCN1109.JPG

DSCN1110.JPG

DSCN1111.JPG

DSCN1112.JPG

DSCN1113.JPG

DSCN1114.JPG

This will need to be picked up in London (SW20), before the 21st of July 2010

James