Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,559   Posts: 1,573,292   Online: 938
      
Results 1 to 3 of 3
  1. #1
    OMU
    OMU is offline

    Join Date
    Oct 2007
    Location
    Norway
    Shooter
    Multi Format
    Posts
    744
    Images
    67

    Contrast teststrip again???

    Hi;
    I'm calibrating my ZoneMaster for Foma Variant 111,
    but i made the test strip for contrast calibration on the wrong channel - PAP 4. - not PAP 3. (PAP 4 is for FOMATONE and has an different correction factor).

    Do I have to make the contrast teststrip again.... ??

    Regards
    OM

  2. #2
    RH Designs's Avatar
    Join Date
    Apr 2003
    Location
    Yorkshire Dales, England
    Shooter
    Multi Format
    Posts
    657
    Images
    18
    Hi OM

    If you made the strips using the Step Wedge then that's fine, you can use them as is because the exposure correction does not affect the range of contrast shown by the step wedge when using that method.

    If you used the alternative method described in section 5.4 of the Calibration Manual, I'd advise you to make new ones. The ones you already made can be used but it's rather a tricky calculation to remove the effects of any adjustments already in PAP4.
    Regards,
    Richard.

    RH Designs - My Photography

  3. #3
    OMU
    OMU is offline

    Join Date
    Oct 2007
    Location
    Norway
    Shooter
    Multi Format
    Posts
    744
    Images
    67
    Thanks for your answer,
    I used the step wedge, and it's as I thought. :-)

    OM



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin