Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,908   Posts: 1,556,119   Online: 1273
      
Results 1 to 5 of 5
  1. #1

    Join Date
    Dec 2011
    Shooter
    35mm
    Posts
    9

    Polaroid 100 lens fungus

    I have a Polaroid Auto 100 that has a little fungus on the front of the rear element. It looks as though I can remove the rear element by removing 4 screws in the lens mount which would hopefully allow access to the front side of the rear element to deal with the fungus.

    Is this the correct procedure to remove the rear element, and will removing the rear element mess up the focus of the lens package?

  2. #2
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,283
    Yes that should give you access to most of the surfaces. However, they have the elements kind of permanently held in place, so I just cleaned the two outermost surfaces and these two inner surfaces. (Polaroid 250 in picture)

  3. #3
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,283
    If your 100 has the bright light/dim light indicator plate on top like the 250, realize that the shop manual calls for tearing that off and replacing it with a new one every time the front of the shutter is opened up. If you are careful you can get it to peel away from one side only like in the picture and preserve it.

  4. #4

    Join Date
    Feb 2010
    Location
    Toronto ON Canada
    Shooter
    Medium Format
    Posts
    547
    Considering the going prices for these, why bother ripping into it, even. I see these for free all over the place. You can go upscale with a 2xx, 3xx or, 4xx.

  5. #5

    Join Date
    Dec 2011
    Shooter
    35mm
    Posts
    9
    Many thanks for the responses.
    If I am interpreting the ic-racer's photo correctly, the four screws seem to hold the entire front lens board assembly onto the rear part of the lens board and the bellows. I was hoping that the raised area around the screws came off by itself, and let the rear lens element drop out. Not the case, however. See my photo from the inside of camera with the film pack removed, below. Under the circumstances I think I will just live with a few small fungus spots. I have not noticed any effect on the photos, anyway.

    So far I've not found any free pack film Polaroids, but I suppose there are folks out there that just want to get rid of them. The local Craigslist currently has a 100 for $40 and a 360 for $100 asking price.

    Click image for larger version. 

Name:	rear lens 300dpi.jpg 
Views:	6 
Size:	42.4 KB 
ID:	44726



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin