Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,930   Posts: 1,585,316   Online: 1050
      
Results 1 to 5 of 5
  1. #1

    Join Date
    Nov 2011
    Shooter
    35mm
    Posts
    2

    canon a1 rewind crank how ?

    Hi everyone great forum !

    I have a problem ... i have a canon a1 with no rewind crank on it and was wondering how i get it back into the camera ? there's a lever which opens the back door but its in the way ? how to i release it to allow space for the rewind crank pin ?

    thanks
    Paul D

  2. #2
    Whiteymorange's Avatar
    Join Date
    Jul 2004
    Location
    Boston area
    Shooter
    Multi Format
    Posts
    2,328
    Images
    26
    Hi Paul, and welcome to APUG! You're right, it's a great forum.

    When I lost a rewind crank from a Ricoh, I stuck a dentist pick into the hole, angled it to catch the ring that has to be lifted to open the back of the camera and pulled up. Just about anything that is stiff, strong and hooked enough to catch on the way out should work. I haven't had to break into the Canons in my stable yet, but I don't think there is much difference.

  3. #3

    Join Date
    Apr 2012
    Shooter
    35mm
    Posts
    31
    Images
    3
    I did the same thing with my electro 35. As soon as I closed the film door, I realized what I'd done. Fortunately, I was able to just take the top cover back off and lift up on the door release to get it open. Since the rewind knob is already off, perhaps you can remove the top cover without opening the film door back up. (not sure if you can do that on the Canon or not)

    Ed

  4. #4
    DWThomas's Avatar
    Join Date
    Jun 2006
    Location
    SE Pennsylvania
    Shooter
    Multi Format
    Posts
    2,280
    Images
    67
    (Welcome to APUG!)

    I'm not sure I fully understand what or how much is missing. From my own venerable A-1:


    Is it just the little crank on the top? Or is it the knob that contains the crank and/or even the spindle below the knob?

    Somewhere online years back I got an A-1 service manual. It's 200 pages are mostly more than I wanted to know about the electronics, but I am linking two pages that show some of the many parts in the area of that rewind.

    Page 158
    Page 167

    It's not all that evident what is happening there (and I'm not about to take my A-1 apart for better look! ) but I think that spindle somehow picks up a link that disengages the door lock. If the spindle is out, maybe some very careful work with a small hook, like a crochet needle or a cleverly bent paperclip would allow picking up the link enough to release the door. The inside of the A-1, with scads of flexible circuit board wound around the interior, is something I would not look forward to digging into.

  5. #5

    Join Date
    Nov 2011
    Shooter
    35mm
    Posts
    2
    Forgot all about posting this but thanks guys will give it a go



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin