Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,302   Posts: 1,536,190   Online: 691
      
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Dave Wooten's Avatar
    Join Date
    Nov 2004
    Location
    Vegas/mysterious mohave co. az, Big Pine Key Fla.
    Shooter
    ULarge Format
    Posts
    2,714
    Images
    20

    Dark Slide material?

    Where can I get the dark slide material used in large format film holders.
    I want to try and make some slides that cover half of the frame only.

    Idea is for 14 x 17, one would be just cut in half, the other would have an inside rectangle cut out near the pull end....I could then use as needed as 8.5" x 14" a nice 1.64 ratio...and allowing me option of 2 shots per film.

    Thanks all
    Dave in Vegas

  2. #2
    Dave Wooten's Avatar
    Join Date
    Nov 2004
    Location
    Vegas/mysterious mohave co. az, Big Pine Key Fla.
    Shooter
    ULarge Format
    Posts
    2,714
    Images
    20
    ok so I do not want to screw up one of my lovely S & S dark slides maybe Sandy's company could design and make me one?

  3. #3
    Dave Wooten's Avatar
    Join Date
    Nov 2004
    Location
    Vegas/mysterious mohave co. az, Big Pine Key Fla.
    Shooter
    ULarge Format
    Posts
    2,714
    Images
    20
    Or two

  4. #4
    Mongo's Avatar
    Join Date
    Jan 2004
    Location
    Pittsburgh, PA
    Shooter
    Multi Format
    Posts
    960
    Dave-

    Since this will only be in place when you take the shot, it doesn't necessarily have to be the same material as a regular dark slide. Take a look at your local hobby shops and art supply stores for plastic that's the same thickness as your dark slide...it shouldn't be hard to find something. Make sure that whatever you find blocks light, and it should be a simple matter of cutting something to the right size and attaching a handle to it.

    I have no idea what kind of plastic modern dark slides are made out of...all of my 8x10 holders are older and are metal. If you can cut metal (for example, with a jigsaw and the appropriate blade) you could make this out of a sheet of metal that's the appropriate thickness.

    Good luck.
    Film is cheap. Opportunities are priceless.

  5. #5
    noseoil's Avatar
    Join Date
    Oct 2003
    Location
    Tucson
    Shooter
    Multi Format
    Posts
    2,898
    Images
    17
    Get someone to use a micrometer for you to measure your existing material if you don't have one. You can then find some aluminum or plastic to use. If you get what you need, aluminum can be anodized to a nice black black once the cutting and edges are filed and smooth and the windows are milled out. Make sure all edges are sanded well with a file and then some very fine wet or dry paper will do the trick (3M makes black automotive stuff for fuinishing paints).

    For sheet aluminum, use a backing board of thin plywood so you don't kink the material when cutting.You may need to use one on front and one on back (1/8" or 3mm) and some clamps to keep things flat and safe while working on it. Do your layout on the plywood and have at it. tim

  6. #6
    Jeffrey's Avatar
    Join Date
    Dec 2004
    Location
    Santa Barbara, CA
    Shooter
    4x5 Format
    Posts
    236
    Images
    24
    Find a local machine shop. They can get black delrin or aluminum or whatever material you want in the correct thickness. They can cut and finish it for you and you can avoid the headaches while getting a superior result. If you can't find a precision shop (not automotive), contact me. That's what I do.
    Jeffrey Sipress -
    Santa Barbara, CA -

    My Photo Site

  7. #7
    Dave Wooten's Avatar
    Join Date
    Nov 2004
    Location
    Vegas/mysterious mohave co. az, Big Pine Key Fla.
    Shooter
    ULarge Format
    Posts
    2,714
    Images
    20
    Thanks Jeff, by the way everyone should check out your site...wonderful photographs! Wow!

    I think I will take you up on making me the slides.....should I send you ones I am using to copy outside dimensions?

    All the best and thanks

    Dave in Vegas

  8. #8

    Join Date
    Feb 2003
    Location
    Floriduh
    Shooter
    35mm
    Posts
    2,266
    Images
    2
    If anything I'd opt for stainless over the softer aluminum. You can get peices made at any sheetmetal shop and they can guage it for you if you bring in an example. Prices should be very reasonable.

  9. #9

    Join Date
    Feb 2003
    Location
    Floriduh
    Shooter
    35mm
    Posts
    2,266
    Images
    2
    P.S...forgot you might have to get creative with darkening it tho.

  10. #10

    Join Date
    Jun 2004
    Location
    Wellington, New Zealand
    Shooter
    Med. Format Pan
    Posts
    279
    Quote Originally Posted by Dave Wooten
    ok so I do not want to screw up one of my lovely S & S dark slides maybe Sandy's company could design and make me one?
    Dave

    Sandy will supply an extra darkslide if you ask him, I'm doing the same for my 5x12, the extra darkslides are $25 each. Is it worth making them yourself for that price? (14x17 would be a little more)


    Clayton

Page 1 of 2 12 LastLast


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin