Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,572   Posts: 1,545,658   Online: 974
      
Results 1 to 10 of 10

Thread: Tripod Designs?

  1. #1
    gr82bart's Avatar
    Join Date
    Mar 2003
    Location
    Culver City, CA
    Shooter
    Multi Format
    Posts
    5,224
    Images
    37

    Tripod Designs?

    Anyone know where I can get a decent tripod design? Also the head mechanism?

    I'm just planning to build my own 4x5. Looks like I've got all the plans I'll need for the camera itself, now I want designs for the tripod too. Also planning to make a nice box for the camera too.

    Thanks in advance, Art.
    Visit my website at www.ArtLiem.com
    or my online portfolios at APUG and ModelMayhem

  2. #2

    Join Date
    Feb 2004
    Location
    Minnesota Tropics
    Shooter
    Multi Format
    Posts
    735
    Art: See the link below and note the corrections the builder/designer would incorporate into his next one. http://www.skgrimes.com/tpod/index.htm

  3. #3
    David A. Goldfarb's Avatar
    Join Date
    Sep 2002
    Location
    Honolulu, Hawai'i
    Shooter
    Large Format
    Posts
    17,290
    Images
    20
    If you want to design your own (since your Bogen tripod should be perfectly adequate for 4x5")--does the camera use a cylindrical rail? If it does, I like the way the Sinar and Linhof pan-tilt heads work for their monorail cameras that have cylindrical rails. The head is simple and just tilts and pans, and leveling is done by loosening the rail clamp, adjusting and tightening. This keeps the head light and compact and low profile.

    The downside of this design is that you have to turn the camera 180-degrees on the head to point it downward. If you want to have the ability to point it down without turning the camera, you might make a kind of Z-shaped head with two plates hinged on opposite sides--one for tilting up and one for tilting down.

    If you are using a square rail, you might look at a thing called the "Levelhead" for inspiration--also a two-plate design, but hinged at 90-degrees so you can level the camera fore-and-aft on one axis and left-right on the other. It's a simple thing, and there should be pictures on the net, but Louis Shu at Photo Gizzmo carries it, if you want to see one in person. Instead of using it just for leveling, you could make it with a wide adjustment range as a full-function head.
    flickr--http://www.flickr.com/photos/davidagoldfarb/
    Photography (not as up to date as the flickr site)--http://www.davidagoldfarb.com/photo
    Academic (Slavic and Comparative Literature)--http://www.davidagoldfarb.com

  4. #4
    Calamity Jane's Avatar
    Join Date
    Jan 2005
    Location
    Manitoba Canada
    Shooter
    Large Format
    Posts
    159
    Images
    1
    Didn't really document the design but have a look at http://www.geocities.com/diannebest/camera/camera1.html bottom of the page and http://www.geocities.com/diannebest/...ra2.index.html also bottom of the page.

    The only thing that doesn't show clearly in the pictures is how the legs attach. I took a piece of 2x12 and cut the "Y" from a solid block.

    The pan surfaces are cut from 3/4" ply. The upper disk has a recess (only about 1/16") that leaves only the circumference to contact the lower disk.

    For really CHEAP, it is incredibly solid. I have used MANY tripods over the years and the only commercial tripods I have used that are more rigid were intended for TV studio cameras.

    It may be "primative" with its wingnut clamping, and it doesn't offer "roll" movement" but it is solid as an Oak stump!

    You can of course, adapt the tilt to suit your camera's bed.

  5. #5
    Dave Wooten's Avatar
    Join Date
    Nov 2004
    Location
    Vegas/mysterious mohave co. az, Big Pine Key Fla.
    Shooter
    ULarge Format
    Posts
    2,714
    Images
    20
    Hello Jane,

    Nice job on the cameras and tripods.....also enjoyed your website....have been practicing up a bit in my old age toying with the idea of participating in some SASS activities...your web postings bring back memories of my youth, hunting rabbits and trapping muscrats etc....yes we needed the food and the money....

  6. #6

    Join Date
    Feb 2004
    Location
    Minnesota Tropics
    Shooter
    Multi Format
    Posts
    735
    Jane: So you have a cannon, too! When you go shooting, you really do go shooting.

  7. #7
    gma
    gma is offline
    gma's Avatar
    Join Date
    Mar 2004
    Location
    Texas
    Shooter
    Multi Format
    Posts
    793
    Images
    9
    Jon Grepstad has some home built tripods on his website of DIY cameras. You will have to search a bit to find them, but there are some real beauties.
    [FONT=Century Gothic][/FONT][SIZE=7][/SIZE][COLOR=DarkOrange][/COLOR] I may be getting older, but I refuse to grow up!

  8. #8
    gr82bart's Avatar
    Join Date
    Mar 2003
    Location
    Culver City, CA
    Shooter
    Multi Format
    Posts
    5,224
    Images
    37
    Thanks for all the links and comments. I'll take a look.

    Regards, Art.
    Visit my website at www.ArtLiem.com
    or my online portfolios at APUG and ModelMayhem

  9. #9
    MenacingTourist's Avatar
    Join Date
    Nov 2004
    Location
    New Jersey
    Shooter
    Large Format
    Posts
    895
    Images
    30
    How mechanically inclined are you? I do a lot of woodworking and have been working on a design that incorporates a surveyers tripod platform. The interlocking leg parts will be wood and all the metal work will be done by my machinist friend.

    I'm more than happy to share the designs with you once I'm finished. Just be prepared to wait as I have several projects going on

  10. #10
    gr82bart's Avatar
    Join Date
    Mar 2003
    Location
    Culver City, CA
    Shooter
    Multi Format
    Posts
    5,224
    Images
    37
    I'm pretty mechanically inclined - mechano set assembler in childhood, civil engineer (structural) by education, continual house renovator before the ex took it all, engineer and head of engineering by profession for several years. I too am already planning with the 'guys' in the shop to make some specialty parts for me.

    I'll wait for the tripod design and appreciate it immensely.

    Art.
    Visit my website at www.ArtLiem.com
    or my online portfolios at APUG and ModelMayhem



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin