Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,291   Posts: 1,535,410   Online: 755
      
Results 1 to 2 of 2
  1. #1

    Join Date
    Sep 2009
    Shooter
    Medium Format
    Posts
    2

    How to disassemble Pentacon six non metered prism?

    Hello to all,

    Does somebody know how to disassemble Pentacon six TL non metering prism? I have fungus inside and it is quite dirty.

    Thanks in advance!

  2. #2

    Join Date
    Sep 2009
    Shooter
    Medium Format
    Posts
    2
    To reply to my self...

    Below black vinyl covering on nonmetered prism there are 3 screws. One is just up from the viewfinder and other two are on the opposite side from viewfinder - when you look at the front of the viewfinder on the bottom left and right side of the vinyl covering. Vinyl covering is padded with plastic where screws reside so you will not 'feel' them if you try to find them with screwdriver. You can just strip off those corners to reach screws. No need to remove complete vinyl covering.


    Be careful



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin