Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,548   Posts: 1,544,563   Online: 1004
      
Results 1 to 3 of 3
  1. #1
    rmolson's Avatar
    Join Date
    Feb 2006
    Location
    Mansfield Ohio
    Shooter
    Medium Format
    Posts
    307

    Calumet roll holder

    Calumet Roll holder C2


    Just received my roll holder from KEH and it is in excellent condition ,like new actually.I had downloaded the instruction manual previous to receiving it and depressed the clutch button and turned the crank to the position between 20 and “S as per the manual. Tried a little dry shooting and the frame counter advanced normal. Loaded the holder with a roll of film with the counter reset to neutral and closed the back .And then turning the film advanced it never moved the frame counter and went to the end of the roll without stopping. Fortunately I was using a dummy load I dropped KEH a note. Meanwhile It is possible to use it and get 8 exposures by turning the crank and counting the revolutions. Any one else run into anything like this?

  2. #2
    rmolson's Avatar
    Join Date
    Feb 2006
    Location
    Mansfield Ohio
    Shooter
    Medium Format
    Posts
    307
    Never mind!!! Just needed to tweak the counter knob a tiny bit. Just being overly cautious with a new piece of equipment .

  3. #3

    Join Date
    Nov 2003
    Posts
    5,240
    Images
    9
    Did that with my SINAR roll film holder. I was being way too cautious.
    Technological society has succeeded in multiplying the opportunities for pleasure, but it has great difficulty in generating joy. Pope Paul VI

    So, I think the "greats" were true to their visions, once their visions no longer sucked. Ralph Barker 12/2004



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin