Jeg tar dette på engelsk da det kan være flere som er interessert.
I am situated in Oslo and have take down my Durst Optimo CL, and have replaced it with a DeVere 504. It is in working order. I have all the parts, a complete set on operating manuals including calibration slide and service manuals showing all the bits and pieces etc.
Motor, autofocus, manual focus, densiometer all are in working order. There may be some problems reprogramming it but I have never really tried to hard as I use it manually. It may need resetting or a change of memory battery. Parts are still availble from Jensen in the states if needed.
So if anyone has one and need as a spare they can contact me in, but it will have to be picked up in Oslo. I would not recommend it to anyone who is unfamiliar with the enlarger.
My alternative now is to take out the lenses (I need a good 150mm) and use some of the parts to build a diffusion enlarger out of an old Rajah 4x5 that I also have. The femoboxes will fit nicely inside it with minor modification.
I will keep it for a good week before I start taking it apart.