Some new 120 stuff

[Photo Engineer]

I have managed to obtain about 1000 ft of 120 sized 5 mil subbed Acetate support. I have also managed to get the design and a sample of a 120 sized film coater. I am not sure if anyone is interested, but I have them here and may photograph them for posting.

This is a new direction for me that I have not yet taken. Just some thoughts on a Mardi Gras evening.

PE

[Hexavalent]

I'd like to see this gear... and of course the ISO 1600 Kodachrome clone you're going to make with it

[willrea]

I'd like to see this gear... and of course the ISO 1600 Kodachrome clone you're going to make with it

He's going to need some Keebler elves to help with that.

[rmazzullo]

PE,

Can you please post photos of the coater you have?

Thanks,

Bob M.

[polyglot]

Wait, what? You have a "sample" of a 120-sized film coater? As in, you have obtained a coating machine? Or if just the designs, how widely-tested/used are these designs? I though that coating was generally done on a much larger scale and that wider rolls were then slit down to specific sizes.

[Rick A]

I was hoping you were going to coat 120 and needed someone to shoot and develope some for research purposes. Hey, I'm available, so pick me for the job

[Chazzy]

I'll be following this with interest.

[Athiril]

I have managed to obtain about 1000 ft of 120 sized 5 mil subbed Acetate support. I have also managed to get the design and a sample of a 120 sized film coater. I am not sure if anyone is interested, but I have them here and may photograph them for posting.

This is a new direction for me that I have not yet taken. Just some thoughts on a Mardi Gras evening.

PE

I approve. I'm still trying to roll out my own acetate base..

[Paul Green]

Sounds interesting

[Photo Engineer]

The coater I have is a hand coater designed to make 120 sized film coatings one at a time. When I make my next batch of high speed emulsion, I may try one or two strips and then mount the film onto the baking paper that I have.

I will try to get some time to take a photo of this and post it here in this thread.

PE