Fuji 100c to tight to pull??

[FM2N]

Hello All,
trying to use Fuji 100c in my Polaroid 360 and it will not pull out after the picture is taken. Any ideas to fix this problem? Rollers are clean, battery is new.
Thanks for the help.
Arthur

[amuderick]

On the inside door of your Polaroid 360 you'll find a metal spring that, when the door is closed, pushes the film pack forward against the film plane. Using your fingers, press hard against this spring and bent it back slightly. It should now apply less pressure to the Fuji film pack (which is slightly thicker than Polaroid packs). That should solve your problem.