Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,735   Posts: 1,515,372   Online: 1060
      
Results 1 to 4 of 4
  1. #1

    Join Date
    Feb 2009
    Location
    Austin, TX
    Shooter
    35mm Pan
    Posts
    1

    Polariod 360 x-sync modification

    I am trying to convert my polaroid 360 to be used with a modern electronic flash. I have removed the original flash bracket and I have four wires. (red, black, tan and purple) I am hoping that someone else has done this and can advise me on which wires need to be used to trigger my flash. Thanks, Dave

  2. #2

    Join Date
    May 2009
    Location
    Berlin Wi.
    Shooter
    Multi Format
    Posts
    244

    Using a 360 with flash.

    Dskslick: I used to have a Polaroid 360 and at that time there was a company in California that dealt only in Polaroid stuff. They had a little adapter that I bought and it consisted of a three inch (about) rubber coated wire that had a little plug (female) on one end an a standard PC connection on the other. It went in either the first two or last two prongs on the connector on top. Sad to say the company must have gone out of business. The name of the company was Graphic Supply. They sold just about everything for a Polaroid, and I think they started mainly to sell film backs or whatever you want to call it that would be processed to use in a printing press. I suppose they were a victim of the digital age. You didn't need to take anything off, just plug that thing in. You might do some searching for the Graphic Supply adapter or perhaps you can find the prong that would match those two prongs and connect it to a regular male PC connector. Good luck. Ric.

  3. #3
    Steve Smith's Avatar
    Join Date
    May 2006
    Location
    Ryde, Isle of Wight
    Shooter
    Medium Format
    Posts
    8,526
    Images
    122
    Try it out. You only have six combinations of two wires to try.


    Steve.

  4. #4

    Join Date
    May 2009
    Location
    Berlin Wi.
    Shooter
    Multi Format
    Posts
    244

    I sure it was the first two prongs.

    Actually, since there were only four prongs if I remember, you could only have three combinations. I'm sure it was the first two though that were closest to the front of the camera. I can draw you a picture of how the little plug looked, but I think if you go to an electronics supply house (Radio Shack?) or on line you will find that little connector. A PC connector can be obtained from an old flash unit or by buying a cord from the photography stores. Porters has some adapters for PC to hot shoe that you might look into for the other end. Why Polaroid didn't make an adapter for that camera is beyond me.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin