Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,721   Posts: 1,514,953   Online: 1093
      
Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1

    Join Date
    Jan 2012
    Location
    Norway
    Shooter
    35mm
    Posts
    25

    Know any labs/users that use D-76 and would want to get paid to do my films?

    Looking for any labs (or users) that would like to develop my films with d-76.

    Labs could be worldwide.

    Same with users.

    I´d pay for the d-76. I don´t need anything scanned.

  2. #2
    John Austin's Avatar
    Join Date
    Oct 2010
    Location
    Southern Forest Region, Western Australia
    Shooter
    Large Format
    Posts
    521
    Blog Entries
    3
    I use D76 regularly and run a commercial fibre based silver gelatin printing service, but I would recommend you find someone in northern Europe

    However, for the cost of a tank, changing bag and a few bottles of chemicals surely you could set that up yourself

    John

    I wou

  3. #3
    dehk's Avatar
    Join Date
    Aug 2010
    Location
    West Michigan
    Shooter
    Multi Format
    Posts
    870
    I'd do them for you but then I don't have pay pal for you to pay me, we can figure that out, PM me if you're interested we can talk about it.
    Last edited by dehk; 03-07-2012 at 03:36 AM. Click to view previous post history.

  4. #4

    Join Date
    Jan 2012
    Location
    Norway
    Shooter
    35mm
    Posts
    25
    Grumpy Old Man: I actually have all the setup and have been doing them myself. However, my room temperature varies, causing the chemistry temperature to drop while developing etc, etc. I´d rather just find someone else.

    I travel very much so I might send films from US one month, then France another and so on so I have no preference as to where the lab/user is located. Negatives would then be sent to Norway. I would probably ship in bulks of 20 or more most of the time.

    Leave me a PM or post here if interested and hopefully I´ll find someone.

    dehk: Sent you a PM

  5. #5

    Join Date
    Aug 2005
    Location
    NYC
    Shooter
    Multi Format
    Posts
    413
    Most of the good NYC lab's techs will run film to your spec in any developer you want. I'd specifically try The Small Darkroom or MV Labs. Both are top notch.

  6. #6
    Mike Wilde's Avatar
    Join Date
    Aug 2006
    Location
    Misissauaga Canada
    Shooter
    Multi Format
    Posts
    2,939
    Images
    29
    Consider travelling with the tank, etc held in a small wash basin that packs in your travel case.
    The small wash basin can be filled from a tap to the right temperature to act as a water bath to stabilize the temperature that you are processing at.

    Also look up drift though temperature control. This was common when processing paper in tubes back in home processed colour days.
    Temp in, and temp out after nominal 5 or so minutes. The temperature changes quite a lot less after five minutes than it does in the first five if the tank is small and the room is hotter or colder. Plastic tank less influenced than stainless steel. Effecive time is determined from the average of the in and out temperature. An tank wwith empty reels water run can be the basis for the experimetal data.

    The option of HC-110 or Rodinal is more friendly to travel developing , but you did say d-76 for some reason that may be important to you.

    There are also calculators in Kodak dataguides among many other sources that give you the adjusted time for variations in temperature so that you do not need to always process at 20C.
    my real name, imagine that.

  7. #7
    foc
    foc is offline

    Join Date
    Jun 2010
    Location
    North West of Ireland
    Shooter
    35mm
    Posts
    89
    I offer a mail order processing service and I am located in Ireland.

    Here is a link (if it is permitted) http://www.photofast.ie/uploads/Film...gmailorder.pdf

  8. #8

    Join Date
    Jun 2005
    Location
    Plymouth. UK.
    Shooter
    Multi Format
    Posts
    1,399
    Images
    3
    Quote Originally Posted by foc View Post
    I offer a mail order processing service and I am located in Ireland.

    Here is a link (if it is permitted) http://www.photofast.ie/uploads/Film...gmailorder.pdf
    ......but do you use Kodak D-76 which is what the OP wants his films developed in?
    http://www.apug.org/forums/viewpost.php?p=1264946

  9. #9
    Bob Carnie's Avatar
    Join Date
    Apr 2004
    Location
    Toronto-Ontario
    Shooter
    Med. Format RF
    Posts
    4,594
    Images
    14
    Elevator has d76 as one of its main lines... we are only running batch processing or larger volumes and are not price sensitive to single roll runs.
    We are in Toronto Ontario .
    www.elevatordigital.ca

  10. #10
    foc
    foc is offline

    Join Date
    Jun 2010
    Location
    North West of Ireland
    Shooter
    35mm
    Posts
    89
    Yes we use D76 otherwise I wouldn't have replied to the OP.

Page 1 of 2 12 LastLast


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin