Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,499   Posts: 1,543,179   Online: 1163
      
Results 1 to 6 of 6
  1. #1
    Amund's Avatar
    Join Date
    Nov 2004
    Location
    Oslo,Norway
    Shooter
    Multi Format
    Posts
    902
    Images
    68

    Neopan 400+Rodinal stand development.

    Reading about stand development here , I decided I`d give it a shot.
    2ml Rodinal in 400ml of 68F water, agitation for the first minute, and I plan to let it stand for two hours(25 minutes so far ) :-)

    Is two hours to little? Too much? Just right? :-)

    Anyone tried this combination?

    Best

  2. #2

    Join Date
    Feb 2004
    Location
    san jose, ca
    Shooter
    Multi Format
    Posts
    2,541
    Images
    77
    Quote Originally Posted by blix@broadpark.no

    Is two hours to little? Too much? Just right? :-)

    Anyone tried this combination?

    Best
    Hard to say, not knowing. I think PanF for two hours is too much but 90 minutes is just about right. Being a faster emulsion, hence normally longer dev times, maybe 2 hours is correct for Fuji400. Only you will be able to tell from your tests. Did you bracket?

    tim in san jose
    Where ever you are, there you be.

  3. #3
    Amund's Avatar
    Join Date
    Nov 2004
    Location
    Oslo,Norway
    Shooter
    Multi Format
    Posts
    902
    Images
    68
    I didn`t bracket as I decided to try stand development after I exposed the film.... The results was a thin negative, and from what I see I should have exposed the film at EI 200. The film was also a bit unevenly developed, so I `ll try again tonight with APX 100 @64, and agitate a couple times every 30 minutes...
    Attached Thumbnails Attached Thumbnails N4Stand-402web.jpg  

  4. #4
    titrisol's Avatar
    Join Date
    Aug 2004
    Location
    Rotterdam
    Shooter
    Multi Format
    Posts
    1,671
    Images
    8
    1+200 Rodinal works very well, didi you presoak?
    That has helped me avoid uneven development
    Mama took my APX away.....

  5. #5
    Amund's Avatar
    Join Date
    Nov 2004
    Location
    Oslo,Norway
    Shooter
    Multi Format
    Posts
    902
    Images
    68
    No, I didn`t presoak...

    But on the film I have drying just now, I presoaked and agitated once each 30 mins and the negs loks great.

  6. #6
    BarrieB's Avatar
    Join Date
    Apr 2003
    Location
    Melbourne, AUSTRALIA
    Shooter
    Multi Format
    Posts
    110
    Rodinal at 1 + 100 or weaker ? Stand Development !!! 4 X 5 Sheet films.
    What are the benefits, if any ?
    My usual dilution is 1 + 50 . Cheers



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin