Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,842   Posts: 1,582,640   Online: 1036
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Nov 2003
    Location
    Atlanta, GA, soon to be Chicago
    Shooter
    Medium Format
    Posts
    111
    Images
    2

    HP5 Sheet Film and Pyrocat HD - development times

    Any suggestions for HP5 Sheet development times in Pyrocat HD to start off with?

  2. #2

    Join Date
    Dec 2002
    Shooter
    Large Format
    Posts
    6,242
    Quote Originally Posted by jtsatterlee
    Any suggestions for HP5 Sheet development times in Pyrocat HD to start off with?
    What are you wanting to do with the negatives? If you are planning on enlarging them, are you using a condensor or diffusion light source? If you are contact printing on Azo or pt-pd, for instance, that is another matter entirely.

    I would suggest that you look at the information in the article prepared by Sandy King about pyro developers that is posted on Unblinkingeye.com. It will give you the density range and development times for several use considerations.

    Good luck

  3. #3

    Join Date
    Nov 2003
    Location
    Atlanta, GA, soon to be Chicago
    Shooter
    Medium Format
    Posts
    111
    Images
    2
    Donald-

    Thanks, either contact or enlargement from a diffusion light source. Havent advanced to Azo or Pt/Pd yet

    John



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin