Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,219   Posts: 1,532,255   Online: 799
      
Results 1 to 4 of 4
  1. #1

    Join Date
    Feb 2012
    Location
    New York
    Shooter
    Large Format
    Posts
    308

    Kodak 4155 Contrast Process Pan Film

    I picked up a few boxes of this film and I know its ISO 100, but I can't find anything else about it the developing process online. PE recommended 9 - 11 minutes in D76. I use this as a starting point unless anybody know for sure or has a datasheet or data book that shows anything.

  2. #2

    Join Date
    Jun 2003
    Posts
    1,644
    Images
    5
    Good Evening Shootar401,

    According to Kodak Professional Black-and-WhiteFilms, December, 1976 date, the speed is 100 under White-Flame Are of Pulsed-Xenon Arc, but only 80 under Tungsten and Quartz Iodine lighting. The recommendation for continuous agitation development is 4 minutes with D-ll for high contrast and 2 minutes with D-8 for maximum contrast. I will supply filter information should you need it.

    Konical

  3. #3

    Join Date
    Aug 2005
    Location
    Los Alamos, NM
    Shooter
    Multi Format
    Posts
    2,044
    From Kodak Professional Black and White Films pamphlet F-5 (9-69):

    "A high contrast panchromatic film 0n .007-inch acetate base for copying originals containing colored lines or printed matter on either white or colored paper. Various filters can be used to increase separation between colors that photgraph in similar tones of gray or to eliminate a color if desired. ... "

    The film is rated at ASA 100 for white flame arc illumination, 80 for tungsten. It was rated as fine grain and very high resolving power. Recommended developers were D-11 for 4 minutes for high contrast and D-8 for 2 minutes for maximum contrast. The recommended time in D-11 gave a contrast index of 2.8. This is an inherently very high contrast film (although not as contrasty as litho films). For more or less continuous tone, document film developers, POTA, or very dilute developers will probably be needed. These will no doubt reduce the film speed. I used a bit of Contrast Process Ortho, a related film, with D-76 once upon a time, and I got continuous tones but still extreme contrast, not good for ordinary work.

  4. #4

    Join Date
    Feb 2012
    Location
    New York
    Shooter
    Large Format
    Posts
    308
    Thanks!



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin