Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,556   Posts: 1,545,034   Online: 893
      
Results 1 to 6 of 6
  1. #1

    Join Date
    May 2013
    Shooter
    35mm
    Posts
    2

    Anybody tried Antifoam / Defoamer in rotary b&w film processing?

    Hello,
    since I've problems with foam on TriX during development in Xtol undiluted @ 21°C in my rotary Jobo processerors after 2 Min. presoaking , I'd like to try silicon oil as a defoaming solution.
    I can't find Kodak Defoamer 1253566 here in germany, that would have been my first choice...
    Any suggestions, what (brand or type) to use instead? Any formula or recipe?

    Kodak defoamer is listed for E-6 any experiences, if and how it could be used in b&w?
    Should I give a drop in developer after mixing? Will it swim on top, would that be a problem since the Jobo ATL3 pumps chemicals from the bottom of the temperated bottles?
    I have 30 years of experience in film developing and do it every week. Since 13 years I do this with the same chemicals, the same machine exactly the same way. Foam is a very new problem for me....

    @Ryuji: You've anounced your own defoamer or defoamer formula. Have you made new experiences yet?

    best
    Ole

    Click image for larger version. 

Name:	foam_crop.jpg 
Views:	20 
Size:	106.2 KB 
ID:	68621

  2. #2

    Join Date
    Jun 2005
    Location
    Plymouth. UK.
    Shooter
    Multi Format
    Posts
    1,401
    Images
    3
    Quote Originally Posted by classic_darkroom View Post
    Hello,
    since I've problems with foam on TriX during development in Xtol undiluted @ 21°C in my rotary Jobo processerors after 2 Min. presoaking , I'd like to try silicon oil as a defoaming solution.
    I can't find Kodak Defoamer 1253566 here in germany, that would have been my first choice...
    Any suggestions, what (brand or type) to use instead? Any formula or recipe?

    Kodak defoamer is listed for E-6 any experiences, if and how it could be used in b&w?
    Should I give a drop in developer after mixing? Will it swim on top, would that be a problem since the Jobo ATL3 pumps chemicals from the bottom of the temperated bottles?
    I have 30 years of experience in film developing and do it every week. Since 13 years I do this with the same chemicals, the same machine exactly the same way. Foam is a very new problem for me....

    @Ryuji: You've anounced your own defoamer or defoamer formula. Have you made new experiences yet?

    best
    Ole

    Click image for larger version. 

Name:	foam_crop.jpg 
Views:	20 
Size:	106.2 KB 
ID:	68621
    Omit the pre-soak and see if that makes a difference.

  3. #3

    Join Date
    Jun 2005
    Location
    Plymouth. UK.
    Shooter
    Multi Format
    Posts
    1,401
    Images
    3
    Quote Originally Posted by classic_darkroom View Post
    Hello,
    since I've problems with foam on TriX during development in Xtol undiluted @ 21°C in my rotary Jobo processerors after 2 Min. presoaking , I'd like to try silicon oil as a defoaming solution.
    I can't find Kodak Defoamer 1253566 here in germany, that would have been my first choice...
    Any suggestions, what (brand or type) to use instead? Any formula or recipe?

    Kodak defoamer is listed for E-6 any experiences, if and how it could be used in b&w?
    Should I give a drop in developer after mixing? Will it swim on top, would that be a problem since the Jobo ATL3 pumps chemicals from the bottom of the temperated bottles?
    I have 30 years of experience in film developing and do it every week. Since 13 years I do this with the same chemicals, the same machine exactly the same way. Foam is a very new problem for me....

    @Ryuji: You've anounced your own defoamer or defoamer formula. Have you made new experiences yet?

    best
    Ole

    Click image for larger version. 

Name:	foam_crop.jpg 
Views:	20 
Size:	106.2 KB 
ID:	68621
    Omit the pre-soak and see if that makes a difference.

  4. #4

    Join Date
    Dec 2004
    Location
    Chicago, Western Suburbs
    Shooter
    4x5 Format
    Posts
    1,438
    Dear Ole,

    As a long time user of the Xtol-Jobo combination, I have never had an issue with the little bit of foaming I encounter. I mix all my chemicals with distilled water, I use softened tap water (from a well) for the wash and then Photo-Flo in distilled water at the end. I ignore the Jobo warning against putting Photo-Flo in their tanks and let it slosh around in there for several minutes getting all nice and bubbly. I do, however, clean everything up in nice hot softened water until their is no sign of Photo-Flo afterword.

    I suggest that if you are getting a lot of foam, a good cleaning might solve your problem.

    Good luck,

    Neal Wydra

  5. #5
    Rick A's Avatar
    Join Date
    Mar 2009
    Location
    north central Pa
    Shooter
    Multi Format
    Posts
    5,941
    Images
    33
    If you are having foaming problems, a single drop of Edwal LFN per liter of developer will remedy the issue.
    Rick A
    Argentum aevum

  6. #6

    Join Date
    May 2013
    Shooter
    35mm
    Posts
    2

    carefully cleaned as usually

    Dear Keith,

    thanks for this idea. I'll give it a try.

    Dear Dean,
    thanks for the answer. It seems, we do it quite the same way. But I, too be safe, put only the loaded reels in the Photo-Flo bath (with destilled Water).
    After that, I wash the single parts of the wheels with complete change three times in 60°C water. I let them dry in its own drying cabinet.

    I've never had this problem before, and what irritades me; there are three reels loaded in the tank, two have trouble with foam, four not. Next run, two have trouble, four not. But the foam canditates have been at different positions...

    I hope somebody has experiences with defoamer, since I wait for an hint this way, I'm going to try to ultrasound cleaning the reels.

    best,
    Ole



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin