Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,212   Posts: 1,532,006   Online: 1196
      
Results 1 to 4 of 4
  1. #1

    Join Date
    Apr 2005
    Shooter
    Plastic Cameras
    Posts
    584
    Images
    28

    Ilford Pan F in Pyrocat

    I cannot find development times for Pan F in Pyrocat. Will use 120 film with rotery processing. Any help would be appreciated!

  2. #2

    Join Date
    Mar 2003
    Location
    Greenville, SC
    Shooter
    Large Format
    Posts
    4,813
    Images
    5
    Quote Originally Posted by Don Mills
    I cannot find development times for Pan F in Pyrocat. Will use 120 film with rotery processing. Any help would be appreciated!
    Try about 8 minutes at 72F if printing on graded silver papers, 12 minutes for printing on VC papers.

    Pan F is a film that I use a lot in 120 film size but I develop it on reels with minimal agitation. For normal contrast scenes I develop with the 1:1:100 dilution for 15 minutes total, with agitation for 1.5 minutes at the beginning of development, and for 10 seconds every three minutes thereafter. This is a very nice combination for very sharp and almost grain free prints in sizes up to 16X20 from 6X9 negatives.

    Sandy

  3. #3

    Join Date
    Apr 2005
    Shooter
    Plastic Cameras
    Posts
    584
    Images
    28
    Thanks Sandy!

  4. #4

    Join Date
    Apr 2003
    Location
    Boise, ID
    Shooter
    Multi Format
    Posts
    460
    Images
    2
    About ready to run the curves on that combo. I assume that there's not much difference between the 120 and the 35mm in that film (I have about 650' in 35mm for testing).

    Steve
    The soul never thinks without an image.
    - Aristotle



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin