Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,954   Posts: 1,522,785   Online: 974
      
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Help needed

  1. #11

    Join Date
    Feb 2003
    Location
    Floriduh
    Shooter
    35mm
    Posts
    2,265
    Images
    2
    You might want to get some Diafine from Calumet. Two part seperate A and B immersion at standard indoor temps that will develop the roll without cutting it. The rated portion will come out perfect and the pushed section will probably be much better then what you could expect otherwise. I've used it on films that I can't remember now and have seen results at +2 stops that were unbeliveably good. Do a search first for Tmax results using it.

  2. #12
    c6h6o3's Avatar
    Join Date
    Oct 2002
    Shooter
    Large Format
    Posts
    3,164
    Images
    6
    Quote Originally Posted by fschifano
    IMO, it's not a very useful technique.
    IMO, it's an indispensable technique. However, I can't do it with TMax because of the sensitization dye. You might check the Azo forum. Contributors there report good results with red safelights and IR goggles.

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin