Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,197   Posts: 1,531,421   Online: 806
      
Results 1 to 5 of 5
  1. #1
    MenacingTourist's Avatar
    Join Date
    Nov 2004
    Location
    New Jersey
    Shooter
    Large Format
    Posts
    895
    Images
    30

    Testing JandC 200 in Rollo Pyro

    I'm going to try and test this film and wondered if my methods sounded okay.

    I have 15 exposed sheets of 6.5cm x9cm and three of them are of the same subject with the same settings. These three will be my control of sorts. I plan on running 3 batches with each batch having one of the control. Each batch will develop for a different time.

    I was told to start with 7 minutes so I plan on doing one for 6.5 min, one for 7 min and one for 7.5 min. I figure with the three controls I can compare them and see what I like.

    Remember, all this is very new to me so please tell me if there's a better way to do this. I don't have a darkroom and I'll be doing all this in a Jobo 3006. None of the exposures contain images that can't be reshot and I think of them as "playing around" images.

    Thanks,

    Alan.

  2. #2
    Kerik's Avatar
    Join Date
    Nov 2002
    Location
    California
    Shooter
    Medium Format
    Posts
    1,465
    Images
    238
    How do you intend to print these negs? Gelatin silver through and enlarger? Alt process? Also, what concentration of A:B:water are you planning to use? I agree with Jay regarding spacing out your processing times more.
    Kerik Kouklis
    Platinum/Gum/Collodion
    www.kerik.com
    2014 Workshop Schedule Online

  3. #3
    MenacingTourist's Avatar
    Join Date
    Nov 2004
    Location
    New Jersey
    Shooter
    Large Format
    Posts
    895
    Images
    30
    Good questions.

    15cc from small bottle
    30cc from large bottle
    1000cc water

    5 sheets of film at a time.

    Since my darkroom is a long way off I'll be printing cyanotypes and VDB. I know this film is small but using the camera is just so much fun I also have a 5x7 that seems much more appropriate for contact printing.

    I'll start with 7min and try the other times as suggested. Thanks guys!

  4. #4
    MenacingTourist's Avatar
    Join Date
    Nov 2004
    Location
    New Jersey
    Shooter
    Large Format
    Posts
    895
    Images
    30
    I souped the negs last night and started with 7min. Turned out ok I think. Some problems included mixing up the film and putting all three of the "control" negs in the first batch then only having enought hypo to only do one more batch.

    They're in the critique gallery now if you'd like to comment. Thanks again for the hand holding I'm having so much fun!

    Alan.

  5. #5
    Marv's Avatar
    Join Date
    Sep 2002
    Location
    Eastern Iowa
    Shooter
    Large Format
    Posts
    141
    Images
    16
    I just popped over an looked at your posts, very nice.

    The tones are very attractive and they look plenty sharp. You have a very distinguished model; he fits the lighting and look perfectly.

    Just for the sake of argument, I would enlist his aid again and redo the shots. I would use the same lighting but this time do your three development time tests, instead of just the one.

    I agree with 5, 7, 9 as a better spread to determine change. And remember to MARK THE NEGATIVES so you know which is which, nip a corner or have a card with a number at the very edge when you take the picture. It's very frustrating to have a half a dozen negatives and no idea what was what, or so I hear, never having actually made that mistake myself!!! At least not that anyone can prove!



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin