Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,872   Posts: 1,583,450   Online: 1160
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Mar 2004
    Shooter
    Multi Format
    Posts
    965
    Images
    58

    8x10 sheets in Stainless reel tanks? (stand development...)

    Hey folks,

    I'm mentally preparing myself to start working in 8x10, and have a question regarding sheet development. I have a very long stainless tank for roll film reels, and noticed that a sheet of 8x10 will fit inside it. Now my question is, can I use this tank for "complete submersion" stand or semi stand development? It seems that this set up would open up the possibility for stand development of the Ortho film I have coming in the mail.

    Thanks in advance,

    André

  2. #2
    David A. Goldfarb's Avatar
    Join Date
    Sep 2002
    Location
    Honolulu, Hawai'i
    Shooter
    Large Format
    Posts
    17,486
    Images
    20
    And the expense isn't even that bad, if you buy them on eBay and consider that they seem to last forever. They're even cheaper if the lids are missing, and you can buy new lids. The Kindermann lids seem to fill and dump fastest, so I usually use those, though they do cost a little more than Kalt or generic lids.
    flickr--http://www.flickr.com/photos/davidagoldfarb/
    Photography (not as up to date as the flickr site)--http://www.davidagoldfarb.com/photo
    Academic (Slavic and Comparative Literature)--http://www.davidagoldfarb.com

  3. #3

    Join Date
    Mar 2004
    Shooter
    Multi Format
    Posts
    965
    Images
    58
    Cool, thanks guys.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin