Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,727   Posts: 1,515,190   Online: 980
      
Results 1 to 9 of 9
  1. #1

    Join Date
    Sep 2002
    Posts
    552

    Efke PL100 developed in...?

    (not pyro :-) ) - any other recommendations for developers for PL100 sheets?

    Favourites?

  2. #2

    Join Date
    Dec 2004
    Location
    Phoeinx Arizona
    Shooter
    Multi Format
    Posts
    1,343
    I used Acufine at ASA 250 and times from the MDC.

    Paul

  3. #3
    ggriffi's Avatar
    Join Date
    Jul 2004
    Location
    NW Indiana
    Shooter
    Multi Format
    Posts
    261
    Images
    4
    Quote Originally Posted by tim atherton
    (not pyro :-) ) - any other recommendations for developers for PL100 sheets?

    Favourites?
    Rodinal 1:50 10 mins. 1 minute presoak straight from J and C site.

    Look here Efke Developing Times


    g

  4. #4

    Join Date
    Sep 2002
    Posts
    552
    thanks - I was looking at the efke 100 tech sheet on the J&C site and had missed that chartI'd missed

  5. #5

    Join Date
    Aug 2005
    Location
    Los Alamos, NM
    Shooter
    Multi Format
    Posts
    2,038
    I've used Rodinol and had decent, but grainy, results. There is always D-76, which gives good results with just about anything.

  6. #6
    Flotsam's Avatar
    Join Date
    Sep 2002
    Location
    S.E. New York State
    Posts
    3,221
    Images
    13
    I've done kb100 in Xtol stock with very nice results. Today I'm going out with several holders of pl100 and I think I will try that again.
    That is called grain. It is supposed to be there.
    =Neal W.=

  7. #7

    Join Date
    Sep 2004
    Shooter
    Plastic Cameras
    Posts
    1,298
    I was pleased with the results I got using HC-110, dilution B.

    (...but more pleased with the results from Pyrocat-HD!)
    Last edited by User Removed; 11-05-2005 at 06:34 PM. Click to view previous post history.

  8. #8
    David A. Goldfarb's Avatar
    Join Date
    Sep 2002
    Location
    Honolulu, Hawai'i
    Shooter
    Large Format
    Posts
    17,135
    Images
    20
    I answered over on the LF forum, but in addition, these shots are all Efke PL100 4x5", EI 200, Acufine 4 min. at 68 deg. F, agitating every 30 sec. in a Nikor tank. Click on the image to cycle through about half a dozen shots--

    http://www.echonyc.com/~goldfarb/halloween/
    flickr--http://www.flickr.com/photos/davidagoldfarb/
    Photography (not as up to date as the flickr site)--http://www.davidagoldfarb.com/photo
    Academic (Slavic and Comparative Literature)--http://www.davidagoldfarb.com

  9. #9
    Ole
    Ole is offline
    Ole's Avatar
    Join Date
    Sep 2002
    Location
    Bergen, Norway
    Shooter
    Large Format
    Posts
    9,280
    Blog Entries
    1
    Images
    31
    Beutler's, 10 min, or Rodinal 1+24, 8 min. Both on a JOBO CPE. 5x7" negs are just great, but I'm beginning to consider cutting the development back by a little bit.
    -- Ole Tjugen, Luddite Elitist
    Norway



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin