Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,970   Posts: 1,523,485   Online: 926
      
Results 1 to 2 of 2
  1. #1
    dustym's Avatar
    Join Date
    Oct 2005
    Location
    Essex, just outside London
    Shooter
    Multi Format
    Posts
    165
    Images
    9

    Adox RC Polywarmtone developer help

    Has anybody had any experience with this paper.
    I use it with Eukobrom 1+9 and it kicks the living hell out of the developer in no time at all.
    If you have used another developer with this paper that gives a a fairly good service please impart your pearls of wisdom.
    My usual tray time with this paper is usually over 3.30 sometimes 4 mins.
    same with the fix

    Rgds
    Dusty

    www.clikpic.com/essexmonochrome
    The camera cannot lie, but it cannot help being selective.

  2. #2

    Join Date
    Oct 2006
    Shooter
    Multi Format
    Posts
    587
    Quote Originally Posted by dustym View Post
    Has anybody had any experience with this paper.
    I use it with Eukobrom 1+9 and it kicks the living hell out of the developer in no time at all.
    If you have used another developer with this paper that gives a a fairly good service please impart your pearls of wisdom.
    My usual tray time with this paper is usually over 3.30 sometimes 4 mins.
    same with the fix

    Rgds
    Dusty

    www.clikpic.com/essexmonochrome
    Hi Dusty,
    I have not used RC but polywarmtone FB. I develop in Ilford multigrade 1 + 9 and find that the developer starts to exhaust after 3 or 4 8 X 10 prints(Temp kept at 25C) . Do any others have this problem? Any suggestions about a different developer?
    Regards
    John



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin