Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 68,663   Posts: 1,481,664   Online: 824
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Jun 2004
    Shooter
    35mm RF
    Posts
    62

    Tetenal Neopress HC + Agfa APX 400S

    Any suggestions for development time at 20C using 1:31 dilution and inversion agitation once per minute in a Paterson tank?
    The leaflet supplied with the developer specifies agitation every 3 secs and I am not sure whether times given are for the 'old' or 'new' Agfa emulsion. I believe development times for the two emulsions are very different, so I would like to hear from anyone with practical experience with the 'old' emulsion and this developer or anyone who reckons they can make a good estimate.

  2. #2

    Join Date
    May 2005
    Location
    Daventry, Northamptonshire, England
    Shooter
    35mm
    Posts
    6,627
    Is once every 3 secs a typo? This is almost rotary processing. If not, this is the opposite end of the spectrum from your idea of once per minute. Difficult to believe these two are compatible, even allowing for new v old emulsion.

    pentaxuser

  3. #3

    Join Date
    Jun 2004
    Shooter
    35mm RF
    Posts
    62
    Quote Originally Posted by pentaxuser View Post
    Is once every 3 secs a typo? This is almost rotary processing. If not, this is the opposite end of the spectrum from your idea of once per minute. Difficult to believe these two are compatible, even allowing for new v old emulsion.

    pentaxuser
    I don't think so, because Neopress HC is designed for fast processing for journalists.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin