Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,752   Posts: 1,515,904   Online: 1096
      
Results 1 to 4 of 4
  1. #1
    hka
    hka is offline
    hka's Avatar
    Join Date
    Dec 2004
    Shooter
    Multi Format
    Posts
    2,122

    Some deposit in D76-H

    I made yesterday a new badge of D76-H and today I saw some little deposit on the bottom of the bottle. Is this normal?
    I mixed very carefull and stirred every component until the stuff where dissolved. How can I avoid this. Thanks for helping me.
    BTW the developer works as usual that's not the problem...
    harry

    Release, the best you can do...

  2. #2
    MikeSeb's Avatar
    Join Date
    Jun 2005
    Location
    Prospect (Louisville), KY, USA
    Shooter
    Medium Format
    Posts
    1,062
    I see this just about every time I make up a batch of D76H, or anything else for that matter. It is not harmful; it will likely go into solution after a few days or weeks.

    Not to worry.
    Michael Sebastian
    Website | Blog

  3. #3
    Mick Fagan's Avatar
    Join Date
    Sep 2005
    Location
    Melbourne Australia
    Shooter
    Multi Format
    Posts
    2,814
    Images
    29
    Harry, I have this and have had this for decades. I just filter it with a coffee filter sitting in a funnel.

    I suspect it is because I use normal tap water.

    Never been a problem.

    Mick.

  4. #4
    hka
    hka is offline
    hka's Avatar
    Join Date
    Dec 2004
    Shooter
    Multi Format
    Posts
    2,122
    I also use normal tap water. Next time I will try distilled water to see if there is any difference.
    harry

    Release, the best you can do...



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin