Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,926   Posts: 1,585,081   Online: 864
      
Results 1 to 8 of 8
  1. #1
    L Gebhardt's Avatar
    Join Date
    Jun 2003
    Location
    NH - Live Free or Die
    Shooter
    Large Format
    Posts
    1,727
    Blog Entries
    1
    Images
    18
    Has anyone done any tests on what the capacity of Pyrocat is. I plan on using about 600ml of solution in a Jobo drum for 12 sheets of film. Is this enough, or should I go higher?

  2. #2

    Join Date
    Sep 2002
    Shooter
    Large Format
    Posts
    4,530
    I think you are pushing it with 600, if you are using the 2500 series drum I used 1 liter and had good results.

  3. #3
    Jorge Oliveira's Avatar
    Join Date
    Jun 2003
    Location
    Brazil
    Shooter
    35mm
    Posts
    614
    Slightly OT:

    Patrick Gainer, of vit C dev fame, recomends mixing Pyrocat part A in (very pure) alcohol without any sulfite.

    For the brave at heart among you...

    Jorge O

  4. #4

    Join Date
    Dec 2002
    Shooter
    Large Format
    Posts
    6,242
    Sandy King recommends 10 oz developer for 8X10 sheet of film.

  5. #5

    Join Date
    Mar 2003
    Location
    Greenville, SC
    Shooter
    Large Format
    Posts
    4,813
    Images
    5
    [quote="Jorge Oliveira"]Slightly OT:

    Patrick Gainer, of vit C dev fame, recomends mixing Pyrocat part A in (very pure) alcohol without any sulfite.

    For the brave at heart among you...

    Jorge,

    Where did you see this recommendation by Patrick Gainer?

  6. #6
    Jorge Oliveira's Avatar
    Join Date
    Jun 2003
    Location
    Brazil
    Shooter
    35mm
    Posts
    614
    Sandy

    In rec.photo.darkroom. But I may have mixed it up a bit, the thread was re phenidone in alcohol.

    "Catechol is soluble in alcohol or better yet, ethylene or propylene glycol. You can make the concentrate for pyrocat-HD using automobile antifreeze, preferably the propylene (safe) type. Leave out everything but phenidone and catechol. Heat it to dissolve. It will keep a long time without sulfite, and stain is better without sulfite.

    This has the advantage that if you want a non-staining developer you can add sulfite to the B solution to your heart's content. You will find that a very small amount of sulfite will produce a fine-grain developer.

    Try it out with the automobile antifreeze. If you like it, you can get propylene glycol from Photo Formulary.
    Wintr is coming on. You can use what's left of the antifreeze in your car."

    But possibly for a test alcohol will do.

    Jorge O

  7. #7
    Jorge Oliveira's Avatar
    Join Date
    Jun 2003
    Location
    Brazil
    Shooter
    35mm
    Posts
    614
    One more thing:

    Re heath the propylene glycol, I've mixed a vit C dev using it. Heath it to almost to 100deg C...


    Jorge O

  8. #8
    Jorge Oliveira's Avatar
    Join Date
    Jun 2003
    Location
    Brazil
    Shooter
    35mm
    Posts
    614
    Sandy

    Another Patrick post - I think this was the one I had in my mind:

    "I can tell you that phenidone, hydroquinone, catechol, pyrogallol and
    ascorbic acid are soluble in alcohols. Be bold. Make a split stock A
    solution of phenidone-hydroquinone, phenidone-pyro or
    phenidone-catechol. Do not use any sulfite in this solution. In fact, if
    you do not use any sulfite in the working solution, you may learn
    something about the relationship between sulfite and granularity that
    you did not know before. You will also find out that hydroquinone is in
    the same class as catechol as a staining-tanning developer. You can
    borrow the Pyrocat-HD formula, but leave out bromide and sulfite."

    Jorge O



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin