Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,566   Posts: 1,545,352   Online: 1039
      
Results 1 to 5 of 5
  1. #1

    Join Date
    Sep 2003
    Location
    Düsseldorf, Germany
    Shooter
    8x10 Format
    Posts
    1,021
    Images
    1
    I noticed a small amount of part of my thumbprint on the bottom edge of an 8x10 negative I processed and dried last night. Rewashing had no effect. Is this permanent? If not, what solutions are there for removing it? If it is, is there anything that can be done during printing to make it less noticeable? Thanks in advance.

  2. #2

    Join Date
    Sep 2002
    Shooter
    Multi Format
    Posts
    1,966
    Images
    1
    is it on the emulsion side?

  3. #3

    Join Date
    Sep 2003
    Location
    Düsseldorf, Germany
    Shooter
    8x10 Format
    Posts
    1,021
    Images
    1
    Yup
    Francesco

  4. #4

    Join Date
    Sep 2002
    Shooter
    Large Format
    Posts
    4,530
    Wet the negative in warm water and gently rub the part with the finger print. Prefrably with gloves. It should do the trick.

  5. #5

    Join Date
    Sep 2003
    Location
    Düsseldorf, Germany
    Shooter
    8x10 Format
    Posts
    1,021
    Images
    1
    I will give it a go. Thanks Jorge.
    Francesco



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin