Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,497   Posts: 1,543,084   Online: 980
      
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11

    Join Date
    Mar 2004
    Location
    Southern California
    Shooter
    Multi Format
    Posts
    3,879
    Images
    11
    Yep, saw that, and posted:

    "If you are processing Arista.EDU 100 roll film on reels, you should not be having this problem."

    And: "Film can be damaged by surface water removal (wiping the film before drying). If this is the case, emulsion hardening may help. An alternative is to use photo-flo (or equivalent) in distilled water for the final rinse and eliminate the wiping."
    Tom Hoskinson
    ______________________________

    Everything is analog - even digital :D

  2. #12

    Join Date
    Dec 2003
    Location
    Davis, CA, USA
    Shooter
    35mm
    Posts
    20
    Quote Originally Posted by Tom Hoskinson
    Yep, saw that, and posted:

    "If you are processing Arista.EDU 100 roll film on reels, you should not be having this problem."

    And: "Film can be damaged by surface water removal (wiping the film before drying). If this is the case, emulsion hardening may help. An alternative is to use photo-flo (or equivalent) in distilled water for the final rinse and eliminate the wiping."
    Thanks for the feedback everyone.

    1. Yeah, I'm processing the film on reels. As far as I can tell, the damage isn't occuring during the processing, but instead when I look at my negatives (emulsion side down) on my light box. Viewing my unsleeved negs on my light box is part of my normal routine, and I have never noticed damage to them before (when the negs were fixed by a conventional fixer). Oh, and the damaged negatives were totally dry when I examined them on my light box -- they had been hanging in my bathroom for around twelve hours.

    2. I use photo-flo and distilled water for my final rinse. I don't wipe the film before drying at all. No water spots so far, knock on wood.

    For the sake of convenience and a non-chemically-stinky bathroom, I think that I'm just going to continue with the TF-4 and just avoid handling my negatives AT ALL when they're unsleeved. I just hope that they don't get scratches when I'm pulling them into and out of sleeves and negative carriers when I'm printing! I also might try a more modern film that incorporates its own hardening agent, but it's hard to beat $1.29/roll for the Arista. :-)

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin