Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,849   Posts: 1,582,825   Online: 738
      
Results 1 to 3 of 3
  1. #1
    Flotsam's Avatar
    Join Date
    Sep 2002
    Location
    S.E. New York State
    Posts
    3,221
    Images
    13

    Tray Solution Quantities

    I am curious. What quantity of solution do you use in trays when print processing?

    I'm only printing 8x10 on single weight these days so I find 24 oz adequate and economical but wonder how much you 16x20 and 20x24 printers normally mix for tray solutions?
    That is called grain. It is supposed to be there.
    =Neal W.=

  2. #2
    Jorge Oliveira's Avatar
    Join Date
    Jun 2003
    Location
    Brazil
    Shooter
    35mm
    Posts
    614
    Neal

    My standard printing is 24X30 cm (yup, I try to avoid these funny numbers of yours)

    Dev - 1 liter;
    Stop (water) - 2 liters;
    Fix (slow) - some 1,5 liter first, 2 liters second.

    Jorge O
    Curitiba - nice place to live, if you don't care about the weather...

  3. #3
    ann
    ann is offline

    Join Date
    Sep 2002
    Shooter
    35mm
    Posts
    2,883
    Images
    26
    For 16 x 20 prints, 176 oz. of developer. 1 gallon of fixer , but even for 8 x 10 prints we use a min. of 56 oz of developer and a pint of fixer. Fiber paper soaks up solution like crazy. (Of course that is dilution numbers)



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin