Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,741   Posts: 1,515,559   Online: 1031
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Dec 2004
    Location
    Moscow, Idaho
    Shooter
    Large Format
    Posts
    36

    Jobo Lift Arm/Lever

    I'm looking to buy the lever for a Jobo CPP/CPE lift. The one on mine broke after many years of use. If anyone has that part or a defunct lift with the lever in good shape, I be interested in getting ahold of it.

    Thanks,

    John

  2. #2

    Join Date
    Sep 2006
    Shooter
    35mm
    Posts
    134
    Why dont you just not use the arm and just lift it by the metal support things under the tank that run the length of the top division?

  3. #3

    Join Date
    Dec 2004
    Location
    Moscow, Idaho
    Shooter
    Large Format
    Posts
    36
    That's what I had to do when the arm broke--with difficulty. The drum (3005) for 8X10 is much longer than the metal support rails underneath and so they are really hard to reach. I don't see any way to get repeatable results that way....



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin