Switch to English Language Passer en langue franšaise Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 75,223   Posts: 1,659,624   Online: 867
      
Results 1 to 3 of 3
  1. #1
    nsurit's Avatar
    Join Date
    Jan 2005
    Location
    Texas Hill Country
    Shooter
    Multi Format
    Posts
    1,395
    Images
    21

    Lens board for Cambo View Camera

    Specifically need one for a Copal #3 and/or that would fit an #4 Acme Synchro (approx. 2.5" hole). Would also be interested in others. What do you have? Thank you, Bill Barber

  2. #2

    Join Date
    Nov 2005
    Location
    Los Angeles, CA
    Shooter
    Multi Format
    Posts
    5,835
    I went through that exercise recently. Cambo did not make a board to fit the Acme Synchro so you'll need to have the hole machined larger. Given that, it might not matter what size you start with but cola 3 hole will require less machining htan a smaller hole.

  3. #3

    Join Date
    Jan 2005
    Location
    Western Canada
    Shooter
    Multi Format
    Posts
    440
    Hi Bill
    I have a grey Cambo board with a 2.5" hole. Board is 6 3/8" square. The board has 3 small threaded holes that looks like it had a retaining ring attached at one time. If you are interested let me know
    Gord



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  Ś   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin